메인 컨텐츠로 가기

Outlook의 전자 메일 메시지 본문에 첨부 파일을 삽입하는 방법은 무엇입니까?

일반적으로 첨부 파일은 이메일 메시지 본문 위의 메시지 헤더에 삽입됩니다. 그러나 때로는 메시지 본문에 첨부 파일이 삽입 된 일부 전자 메일 메시지를받을 수 있으므로 첨부 파일이 많이 표시되고 무시하기가 쉽지 않습니다. 여기에서는 Microsoft Outlook에서 작성하는 전자 메일 메시지의 본문에 첨부 파일을 삽입하는 방법에 대한 지침을 제공합니다.

메시지 본문에 직접 첨부 파일 삽입

메시지 헤더에서 메시지 본문으로 첨부 파일 이동


화살표 블루 오른쪽 거품 메시지 본문에 직접 첨부 파일 삽입

먼저 작성하는 전자 메일 메시지의 본문에 첨부 파일을 직접 삽입하는 방법을 보여줍니다.

1 단계 : 새 이메일 메시지 작성 :
  1. Outlook 2010/2013에서 새 전자 메일 버튼의 신제품 그룹에 탭.
  2. Outlook 2007에서는 입양 부모로서의 귀하의 적합성을 결정하기 위해 미국 이민국에 > 신제품 > 메일 메시지.

2 단계 : 현재 이메일 메시지를 서식있는 텍스트 형식으로 변환합니다.

  1. Outlook 2010/2013에서 서식있는 텍스트 버튼의 형성 그룹에 텍스트 서식 탭.
  2. Outlook 2007에서는 서식있는 텍스트 버튼의 형성 그룹에 옵션 탭.

3 단계 : 작성 메시지 본문에서 첨부 파일을 추가 할 위치에 커서를 놓습니다.

3 단계 : 파일 첨부 버튼 또는 Outlook 항목 (또는 항목 첨부) 버튼을 포함 그룹에 끼워 넣다 탭.

팝업 대화 상자에서 첨부 파일을 선택하고 OK or 끼워 넣다 버튼을 클릭합니다.

그런 다음 첨부 파일 또는 Outlook 항목이 3 단계에서 커서를 놓은 위치에 삽입됩니다. 다음 스크린 샷을 참조하십시오.

이메일을 편집하는 동안 항상 이메일 본문에 첨부 파일을 삽입하려면 파일> 옵션> 메일을 클릭하고 메시지 작성 섹션의이 형식으로 메시지 작성 드롭 다운 목록에서 서식있는 텍스트를 선택합니다.
문서 첨부 7


Outlook에서 원본 첨부 파일이있는 회신 메시지

우리 모두 알고 있듯이 Outlook에서 수신자에게 메시지를 회신하면 첨부 파일이 원본 메시지에서 제거됩니다. 첨부 파일을 유지하면서 마사지에 답장하고 싶다면 시도해 볼 수 있습니다. Outlook 용 Kutools's 첨부 파일로 답장 기능, 그것은 원본 첨부 파일로 하나의 메시지에 응답 할 수 있으며 모든 messafe에서도 작동합니다.    전체 기능 60일 무료 평가판을 보려면 클릭하십시오!
 
첨부 파일로 문서 회신
 
Outlook 용 Kutools : 수십 개의 편리한 Outlook 추가 기능이 있으며 60 일 동안 제한없이 무료로 사용해 볼 수 있습니다.

화살표 블루 오른쪽 거품 메시지 헤더에서 메시지 본문으로 첨부 파일 이동

때로는 이미 첨부 파일을 삽입했을 수 있습니다. 붙여진: 이메일 메시지 작성 본문 위의 상자. 이 조건에서 메시지 형식을 변경하고 메시지 본문에 첨부 파일을 표시 할 수도 있습니다.

클릭 만하면됩니다. 서식있는 텍스트 버튼의 형성 그룹에 텍스트 서식 Outlook 2010/2013의 탭 (또는 옵션 Outlook 2007의 탭)을 클릭하면 첨부 파일이 메시지 본문으로 즉시 이동됩니다.


최고의 사무 생산성 도구

Outlook 용 Kutools - 귀하의 전망을 강화하는 100개 이상의 강력한 기능

🤖 AI 메일 도우미: AI 마법이 적용된 즉각적인 전문가 이메일 - 원클릭으로 천재적인 답변, 완벽한 어조, 다국어 숙달이 가능합니다. 손쉽게 이메일을 변환하세요! ...

📧 이메일 자동화: 부재중(POP 및 IMAP에서 사용 가능)  /  이메일 보내기 예약  /  이메일 발송 시 규칙에 따른 자동 참조/숨은참조  /  자동 전달(고급 규칙)   /  인사말 자동 추가   /  여러 수신자 이메일을 개별 메시지로 자동 분할 ...

📨 이메일 관리: 이메일을 쉽게 기억할 수 있습니다.  /  제목 및 기타 사기 이메일 차단  /  중복 이메일 삭제  /  고급 검색  /  폴더 통합 ...

📁 첨부 파일 프로일괄 저장  /  일괄 분리  /  일괄 압축  /  자동 저장   /  자동 분리  /  자동 압축 ...

🌟 인터페이스 매직: 😊더 예쁘고 멋진 이모티콘   /  탭 보기로 Outlook 생산성 향상  /  문을 닫는 대신 전망을 최소화하세요 ...

???? 원클릭 불가사의: 수신 첨부 파일과 함께 전체 회신  /   피싱 방지 이메일  /  🕘발신자의 시간대 표시 ...

👩🏼‍🤝‍👩🏻 연락처 및 캘린더: 선택한 이메일에서 연락처 일괄 추가  /  연락처 그룹을 개별 그룹으로 분할  /  생일 알림 제거 ...

이상 100 특징 당신의 탐험을 기다려주세요! 더 알아보려면 여기를 클릭하세요.

 

 

Comments (35)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
very helpful !
This comment was minimized by the moderator on the site
Not what I wanted at all - just wanted to insert HTML directly into HTML formatted message
This comment was minimized by the moderator on the site
Hi, Mark, if you are in Outlook 2013 or earlier versions, click Insert > Attach File, in the popping dialog, choose the html file, then click arrow beside Insert button to choose Insert as text, then the HTML file has been inserted into boday of the HTML formatted message. If you are in Outlook 2016 or later versions (including 365), you need to enable the old Attach File button firstly. Click File > Options, then in Outlook Options dialog, click Quick Access Toolbar > All Commands > Attach File > Add to add the old Attach File command to the Toolbar. Then apply this added Attach File to insert html as text into body.
This comment was minimized by the moderator on the site
Thanks so much. This was extremely useful and much easier than I thought!
This comment was minimized by the moderator on the site
Wow it's great, Very useful. Thnx.
This comment was minimized by the moderator on the site
I prefer my attachments in the body of my email. Is there a way to change this in settings so you don't have to select the Rich Text everytime I compose a new message?
This comment was minimized by the moderator on the site
Hello, Anonymous, you can change the option as below screenshot shown, then you will write emails always as rich text, and the attachments will be always inserted in body.
This comment was minimized by the moderator on the site
Sorry, as so far, we only can insert attachments in body by changing the settting every time. Maybe we will developer a utility to satisfy this need.
This comment was minimized by the moderator on the site
My attachment button is not visible in Outlook. Can you explain? I need to attach an item but I don't see button.
This comment was minimized by the moderator on the site
Sorry, sdads, I do not know how to find the button either.
This comment was minimized by the moderator on the site
Hi! My attachments are set to go to the bottom of the email, no matter how long it is. How do I change that so they don't go to the bottom anymore?
This comment was minimized by the moderator on the site
Thank you so much! This made my day!
This comment was minimized by the moderator on the site
how can u insert the file full sized and not like a thumbnail type thing
This comment was minimized by the moderator on the site
Do you mean to insert the file and show all file contents in the message body?
This comment was minimized by the moderator on the site
Hey Thanks for this article..It was very useful. :-)
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations