메인 컨텐츠로 가기

Word에서 텍스트 경계를 표시하거나 숨기는 방법은 무엇입니까?

Microsoft Word 사용자는 텍스트 경계를 사용하여 문서의 정확한 경계를 볼 수 있습니다. 이 자습서에서는 Word에서 텍스트 경계를 빠르게 표시하거나 숨기는 방법을 보여줍니다.

Word 2003에서 텍스트 경계 표시 또는 숨기기

Word 2007/2010/2013에서 텍스트 경계 표시 또는 숨기기

Kutools를 사용하여 Word에서 텍스트 경계 표시 또는 숨기기

Word 용 권장 생산성 도구

Word 용 Kutools: AI 통합 🤖, 100개 이상의 고급 기능으로 문서 처리 시간을 50% 절약할 수 있습니다.무료 다운로드

사무실 탭: Word(및 기타 Office 도구)에 브라우저와 유사한 탭을 도입하여 다중 문서 탐색을 단순화합니다.무료 다운로드



화살표 블루 오른쪽 거품 Word 2003에서 텍스트 경계 표시 또는 숨기기

Office 탭: Word, Excel, PowerPoint에 탭 인터페이스를 제공합니다...
OT 단어 중간 광고 100
지금 귀하의 작업흐름을 향상시키세요.      상세 보기       무료 다운로드

1 단계 : 선택 옵션 도구 메뉴;

2 단계 : 클릭 관측 탭, 확인 텍스트 경계 in 인쇄 및 웹 레이아웃 옵션 그룹은 문서의 텍스트 경계를 표시합니다.


화살표 블루 오른쪽 거품 Word 2007/2010/2013에서 텍스트 경계 표시 또는 숨기기

1 단계 : 클릭 입양 부모로서의 귀하의 적합성을 결정하기 위해 미국 이민국에 탭  다음을 클릭합니다 옵션 사용하는 경우 단어 2010 / 2013. 딸깍 하는 소리 Office 아이콘 Word 2007.

2 단계 : 클릭 Advnaced >> 확인 텍스트 경계 표시 in 문서 내용 표시 문서에서 텍스트 경계를 표시하고 숨기려면 선택 취소합니다.


화살표 블루 오른쪽 거품 Kutools를 사용하여 Word에서 텍스트 경계 표시 또는 숨기기

Kutools는 사용자에게 문서의 텍스트 경계 및 기타 문서 내용을 표시하거나 숨기는 쉬운 방법을 제공합니다.

Word 용 Kutools편리한 추가 기능인에는 작업을 용이하게하고 워드 문서 처리 능력을 향상시키는 도구 그룹이 포함되어 있습니다. 45 일 무료 평가판! 이제 그것을 잡아!

1. 클릭하여 유틸리티를 적용하십시오 Enterprise > 디스플레이 설정. 스크린 샷보기 :

doc-show-hide-tex-boundaries-1

2. 확인 또는 선택 해제 텍스트 경계 확인란의 디스플레이 설정 텍스트 경계를 표시하거나 숨기는 대화 상자. 스크린 샷보기 :

doc-show-hide-tex-boundaries-2

다음과 같이 결과를 볼 수 있습니다.

자세한 내용은 다음 웹 사이트를 방문하십시오 : Word 문서에 문서 내용 표시.


관련 기사 :


최고의 사무 생산성 도구

Word 용 Kutools - Over로 단어 경험을 향상시키세요 100 놀라운 기능!

🤖 Kutools AI 도우미: AI로 글쓰기를 변화시키세요 - 콘텐츠 생성  /  텍스트 다시 쓰기  /  문서 요약  /  정보 문의 문서 기반, 모두 Word 내에서

📘 문서 숙달: 페이지 분할  /  문서 병합  /  다양한 형식으로 선택 항목 내보내기(PDF/TXT/DOC/HTML...)  /  PDF로 일괄 변환  /  페이지를 이미지로 내보내기  /  한 번에 여러 파일 인쇄...

컨텐츠 편집: 일괄 찾기 및 바꾸기 여러 파일에 걸쳐  /  모든 사진 크기 조정  /  테이블 행과 열 바꾸기  /  표를 텍스트로 변환...

🧹 손쉬운 청소: 쓸어버리다 추가 공간  /  섹션 나누기  /  모든 헤더  /  텍스트 상자  /  하이퍼 링크  / 더 많은 제거 도구를 보려면 다음 페이지를 방문하세요. 그룹 제거...

광고 삽입물: 삽입 천 단위 구분 기호  /  확인란  /  라디오 버튼  /  QR 코드  /  바코드  /  대각선 표  /  방정식 캡션  /  이미지 캡션  /  테이블 캡션  /  여러 장의 사진  / 더 자세히 알아보세요. 그룹 삽입...

🔍 정밀한 선택: 핀포인트 특정 페이지  /  테이블  /  모양  /  제목 단락  / 탐색 기능 향상 배우기 기능 선택...

스타 강화: 어떤 위치로든 빠르게 이동  /  반복되는 텍스트 자동 삽입  /  문서 창 간을 원활하게 전환합니다.  /  11 변환 도구...

👉 이러한 기능을 사용해 보고 싶으신가요? Word 용 Kutools는 다음을 제공합니다. 60 일 무료 사용, 제한 없음! 🚀
 
Comments (9)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Workaround:
Use grid settings (you can add it to Quick Access Toolbar from list of commands).
Set Horizontal spacing to width of page minus margins.
Select Use margins.
Select Display gridlines on screen.
Select Vertical every, and set at one.
Toggle Gridlines on and off on the View tab.

I use this with crop marks and don't bother with horizontal lines.
This comment was minimized by the moderator on the site
I have same question. It's very important for my work to have text boundary only around the page, without lines after each "enter". Hopefully someone would solve this issue for me ?
This comment was minimized by the moderator on the site
I have same concern.If someone could solve this problem for me, it is of great importance for my work to have just text boindary around the pages without lines showing up between each "enter". In anticipation of helpful comments.
This comment was minimized by the moderator on the site
I have same concern regarding text boundaries in word 2013, having strange lines between all enters. Why?? It tires eyes. And while formating I need JUST page boundaries, like all previous word programs had, at least word 2003, 2007 and 2010. PĹEASE let me know what to do.
This comment was minimized by the moderator on the site
Thank you this was very helpful! :-)
This comment was minimized by the moderator on the site
I was able to find Enterprise Display Settings. this became visible after a re-boot. However, the problem I wanted to solve is still not available. In Word 2010 and older, text boundaries showed the margins on the entire page. In 2013,boundaries only appear as you type and there is some strange line between every "enter". I need to see my entire page boundaries - as I did in 2010 and 2007. If there is a way using Kutools, please advise as this was the only reason I am trying this add-on.
This comment was minimized by the moderator on the site
I've downloaded it and it doesn't appear anywhere in word or change anything. Is there a special action required to make it work - otherwise useless. You show a screen shot that says apply by clicking Enterprise Display Settings. Where is that? I can't find that anywhere in my WORD 2013.
This comment was minimized by the moderator on the site
Thanks so much, I was in hesitation in office 2007. I didn't find anything here like 2003, but finally I got it. Another issue I have that I want to put number in each column like I am going to write a book in office 2007 and there has 2 columns every page, So I need to put number on every columns . Could you explain something ?
This comment was minimized by the moderator on the site
thanks for help me. it's a long days ago problem for me. Nirjhar
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations