메인 컨텐츠로 가기

기존 Word 문서에 Word 템플릿을 적용하는 방법은 무엇입니까?

일반적으로 새 Word 문서에 Word 서식 파일을 쉽게 적용 할 수 있습니다. 그러나 기존 Word 문서의 템플릿을 변경하는 작업은 어렵습니다. 기존 Word 문서에 Word 템플릿을 적용하거나 변경하려는 아이디어가 있습니까? 아래 방법은 작업을 쉽게 해줍니다.

기존 Word 문서에 Word 템플릿 적용


기존 Word 문서에 Word 템플릿 적용

기존 Word 문서에 Word 템플릿을 적용하거나 변경하려면 아래 단계를 따르십시오.

1. 템플릿을 적용 할 Word 문서를 열고 입양 부모로서의 귀하의 적합성을 결정하기 위해 미국 이민국에 > 옵션 Word 옵션 대화 상자를 엽니 다.

2. Word 옵션 대화 상자에서 (1) 클릭 추가 기능 왼쪽 막대에서 (2) 고르다 Canva의 제작된 채널아트 템플릿을 인사말 관리 드롭 다운 목록 및 (3) 클릭 Go 단추. 스크린 샷보기 :

3. 새로운 시작 템플릿 및 추가 기능 대화 상자에서 문서 스타일 자동 업데이트 옵션을 클릭하고 연결 단추. 스크린 샷보기 :

4. 템플릿 첨부 대화 상자에서 (1) 적용 할 개인 템플릿이 포함 된 폴더를 열고 (2) 지정된 개인 템플릿을 선택하고 (3) 클릭 엽니다 단추. 스크린 샷보기 :

주의 사항: 지정된 개인 워드 템플릿을 기본 커스텀 오피스 템플릿 폴더에 저장 한 경우 폴더 경로로이 폴더를 빠르게 열 수 있습니다. % username % \ Documents \ Custom Office 템플릿.

5. 클릭 OK 버튼을 클릭하면 템플릿 및 추가 기능 대화 상자로 돌아갑니다.
이제 지정된 Word 템플릿이 기존 Word 문서에 즉시 적용됩니다. 스크린 샷보기 :

주의 사항: 기존 Word 문서에서 개인 템플릿을 제거하려면 위의 단계를 반복하고 아래 스크린 샷과 같이 기본 Word 템플릿을 문서에 적용하십시오.
참고로 폴더 경로가있는 기본 Word 템플릿이 포함 된 폴더를 열 수 있습니다. C : \ Users \ 사용자 _ 이름 \ AppData \ Roaming \ Microsoft \ Templates.

탭 브라우징 및 Firefox, Chrome, Internet Explore 10과 같은 여러 Word 문서 편집!

Firefox / Chrome / IE에서 여러 웹 페이지를보고 해당 탭을 쉽게 클릭하여 전환하는 데 익숙 할 수 있습니다. 여기에서 Office 탭은 유사한 처리를 지원하므로 하나의 Word 창에서 여러 Word 문서를 탐색하고 탭을 클릭하여 문서간에 쉽게 전환 할 수 있습니다. 전체 기능 무료 평가판을 보려면 클릭하십시오!
Firefox로 한 창에서 여러 단어 문서 검색

최고의 사무 생산성 도구

Word 용 Kutools - Over로 단어 경험을 향상시키세요 100 놀라운 기능!

🤖 Kutools AI 도우미: AI로 글쓰기를 변화시키세요 - 콘텐츠 생성  /  텍스트 다시 쓰기  /  문서 요약  /  정보 문의 문서 기반, 모두 Word 내에서

📘 문서 숙달: 페이지 분할  /  문서 병합  /  다양한 형식으로 선택 항목 내보내기(PDF/TXT/DOC/HTML...)  /  PDF로 일괄 변환  /  페이지를 이미지로 내보내기  /  한 번에 여러 파일 인쇄...

컨텐츠 편집: 일괄 찾기 및 바꾸기 여러 파일에 걸쳐  /  모든 사진 크기 조정  /  테이블 행과 열 바꾸기  /  표를 텍스트로 변환...

🧹 손쉬운 청소: 쓸어버리다 추가 공간  /  섹션 나누기  /  모든 헤더  /  텍스트 상자  /  하이퍼 링크  / 더 많은 제거 도구를 보려면 다음 페이지를 방문하세요. 그룹 제거...

광고 삽입물: 삽입 천 단위 구분 기호  /  확인란  /  라디오 버튼  /  QR 코드  /  바코드  /  대각선 표  /  방정식 캡션  /  이미지 캡션  /  테이블 캡션  /  여러 장의 사진  / 더 자세히 알아보세요. 그룹 삽입...

🔍 정밀한 선택: 핀포인트 특정 페이지  /  테이블  /  모양  /  제목 단락  / 탐색 기능 향상 배우기 기능 선택...

스타 강화: 어떤 위치로든 빠르게 이동  /  반복되는 텍스트 자동 삽입  /  문서 창 간을 원활하게 전환합니다.  /  11 변환 도구...

👉 이러한 기능을 사용해 보고 싶으신가요? Word 용 Kutools는 다음을 제공합니다. 60 일 무료 사용, 제한 없음! 🚀
 
Comments (25)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Procedure does not work.
I foolow the steps, but after last OK nothing changes in document.
This comment was minimized by the moderator on the site
Hello Extend Office

Thanks so much for this article, extremely useful.

Is there any way to apply a source template to multiple documents using your KuTools for word product?

Thanks!
This comment was minimized by the moderator on the site
Hi John,

For now, the feature only allows you to apply a source template to one document a time.

You can submit a feature request to . 🙂

Amanda
This comment was minimized by the moderator on the site
I get an error message; the template is not valid
This comment was minimized by the moderator on the site
Hi Larry,
Would you like tell us more about the error message? The more detailed you describe the error, the faster we can understand and solve it.
This comment was minimized by the moderator on the site
I have created a document based on a template. Later on, I made some changes in the template. How can I update my document and apply the changes?
This comment was minimized by the moderator on the site
Hi Jatinder,
You can follow the same steps introduced in this article to update the template in you document.
This comment was minimized by the moderator on the site
I have created a document based on a template. Later on, I made some changes in the template. How can I update my document and apply the changes?
This comment was minimized by the moderator on the site
Thank you, it works!
This comment was minimized by the moderator on the site
Thanks, very useful!
This comment was minimized by the moderator on the site
Alt-T + I opens the Template dialog where normal is the default template. You can change this to an other existing template by clicking the Attach... Button an choose the new template.
!!! To apply the styles, check the "Automatically update document styles"
You're done.
This comment was minimized by the moderator on the site
Perfect, it's damn shortcut !
This comment was minimized by the moderator on the site
I have a simple solution to at least have the base lines of your attachments. First, go to Insert ribbon > click on object (below date and time) > select text from file (choose the document to attach). That should be it :) Hope it helps
This comment was minimized by the moderator on the site
very easy to follow, thankyou
This comment was minimized by the moderator on the site
Hi Ryan,
Thanks for your comment and advice. The new method seems not work in my Office work environments. Could you show more detailed steps and description about your method? Thanks in advace!
This comment was minimized by the moderator on the site
When you "attach" the template and select "automatically update document styles", the template styles update to the styles list, but for existing styles in the document, you have to apply the new template styles. In other words, you have to select the text and click the style from the styles list for it to take effect. Usually after I attach the template, I turn around and deselect the "automatically update document styles" so as not to corrupt styles if I make a mistake. Also, if I make a mistake, such as moving the indentation of a style I have defined as "table text" (which changes all table text in the document), I go back into the Developer tab, use the Organizer button, open the template and re-import the table text style to fix it in the document.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations