메인 컨텐츠로 가기

Excel에서 셀 내용을 주석으로 변환하는 방법은 무엇입니까?

일부 정보로 채워진 셀 범위가 있고 이제 해당 셀 내용을 워크 시트의 주석으로 변환하려고 할 수 있습니다. Excel에서이 작업을 완료 할 수 있습니까? 다음은이 문제를 해결하는 몇 가지 간단한 방법입니다.

셀 내용을 주석으로 변환 VBA 코드

셀 내용을 주석으로 빠르게 변환 Excel 용 Kutools


화살표 블루 오른쪽 거품 VBA 코드를 사용하여 셀 내용을 주석으로 변환

다음의 간단한 VBA 코드는 셀 내용을 주석으로 변환하는 데 도움이 될 수 있으며 다음 단계에 따라 코드를 적용 할 수 있습니다.

1. 주석으로 변환 할 셀 값 범위를 선택하십시오.

2. 딸깍 하는 소리 개발자 > Visual Basic을새를 애플리케이션 용 Microsoft Visual Basic 창이 표시되면 끼워 넣다 > 모듈을 클릭하고 모듈에 다음 코드를 입력합니다.

Sub CellToComment()
'Updateby20140509
Dim Rng As Range
Dim WorkRng As Range
On Error Resume Next
xTitleId = "KutoolsforExcel"
Set WorkRng = Application.Selection
Set WorkRng = Application.InputBox("Range", xTitleId, WorkRng.Address, Type:=8)
For Each Rng In WorkRng
    Rng.NoteText Text:=Rng.Value
Next
End Sub

3. 그런 다음 문서 나누기 5 버튼을 눌러 코드를 실행합니다. 변환 할 범위를 선택할 수있는 대화 상자가 표시되고 OK, 선택한 모든 셀 내용이 주석으로 변환되었습니다. 스크린 샷보기 :


doc-cells-to-comments1 -2 doc-cells-to-comments2

화살표 블루 오른쪽 거품Excel 용 Kutools를 사용하여 셀 내용을 주석으로 빠르게 변환

Excel 초보자로서 VBA 코드는 약간 어렵습니다. 그래서 이것을 다루는 간단한 방법을 소개하겠습니다.

Excel 용 Kutools : 300 개 이상의 편리한 Excel 추가 기능으로 30 일 동안 제한없이 무료로 사용해 볼 수 있습니다. 그것을 지금

Excel 용 Kutools를 설치 한 경우 주석 및 셀 변환 of 쿠툴 셀 내용을 댓글로 빠르고 편리하게 변환 할 수 있습니다. 다음과 같이하십시오 :

1. 주석으로 변환하려는 범위를 강조 표시하십시오.

2. 딸깍 하는 소리 쿠툴 > 더 보기 > 주석 및 셀 변환, 스크린 샷 참조 :

3. 에서 주석 및 셀 변환 대화 상자에서 셀 내용을 주석으로 변환 선택권. 스크린 샷보기 :

4. 딸깍 하는 소리 OK. 그리고 선택한 모든 셀 내용이 셀 주석으로 변환되었습니다. 스크린 샷보기 :

주석 및 셀 변환 기능을 사용하면 주석을 셀 내용으로 변환 할 수도 있습니다. 자세한 내용은 주석 및 셀 변환다음 사이트를 방문하시기 바랍니다 주석 및 셀 기능 설명 변환.


관련 기사 :

최고의 사무 생산성 도구

🤖 Kutools AI 보좌관: 다음을 기반으로 데이터 분석을 혁신합니다. 지능형 실행   |  코드 생성  |  사용자 정의 수식 만들기  |  데이터 분석 및 차트 생성  |  Kutools 기능 호출...
인기 기능: 중복 항목 찾기, 강조 표시 또는 식별   |  빈 행 삭제   |  데이터 손실 없이 열이나 셀 결합   |   수식없이 반올림 ...
슈퍼 조회: 다중 기준 VLookup    다중 값 VLookup  |   여러 시트에 걸친 VLookup   |   퍼지 조회 ....
고급 드롭다운 목록: 드롭다운 목록을 빠르게 생성   |  종속 드롭다운 목록   |  다중 선택 드롭 다운 목록 ....
열 관리자: 특정 개수의 열 추가  |  열 이동  |  Toggle 숨겨진 열의 가시성 상태  |  범위 및 열 비교 ...
특색 지어진 특징: 그리드 포커스   |  디자인보기   |   큰 수식 바    통합 문서 및 시트 관리자   |  리소스 라이브러리 (자동 텍스트)   |  날짜 선택기   |  워크 시트 결합   |  셀 암호화/해독    목록으로 이메일 보내기   |  슈퍼 필터   |   특수 필터 (굵게/기울임꼴/취소선 필터링...) ...
상위 15개 도구 세트12 본문 도구 (텍스트 추가, 문자 제거,...)   |   50+ 거래차트 유형 (Gantt 차트,...)   |   40+ 실용 방식 (생일을 기준으로 나이 계산,...)   |   19 삽입 도구 (QR 코드 삽입, 경로에서 그림 삽입,...)   |   12 매출 상승 도구 (숫자를 단어로, 환율,...)   |   7 병합 및 분할 도구 (고급 결합 행, 셀 분할,...)   |   ... 그리고 더

Excel용 Kutools로 Excel 기술을 강화하고 이전과는 전혀 다른 효율성을 경험해 보세요. Excel용 Kutools는 생산성을 높이고 시간을 절약하기 위해 300개 이상의 고급 기능을 제공합니다.  가장 필요한 기능을 얻으려면 여기를 클릭하십시오...

상품 설명


Office Tab은 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게 만듭니다.

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, Publisher, Access, Visio 및 Project.
  • 새 창이 아닌 동일한 창의 새 탭에서 여러 문서를 열고 만듭니다.
  • 생산성을 50% 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
Comments (7)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Is there any plan to convert to Comments instead of notes for the functionality of the new Excel versions?
This would be very helpful

Here is a VBA that works but a Kutools shortcut would be nice as it would work in any file extension instead of only Macro compatible

Convert Cell Content to Comment
Sub ConvertToComment()
Dim C As Range
For Each C In Selection
C.ClearComments
If Len(C.Value) > 0 Then
C.AddComment
C.Comment.Text C.Value & ""
End If
'Optional: Delete cell content after converting
C.ClearContents
Next C
End Sub
This comment was minimized by the moderator on the site
hi! hi about new Excel comments option, not notes?
This comment was minimized by the moderator on the site
Hi, I use this macro to check old values in a range of cell. How can add comments to existing comments with a text. eg - first value is 1000. then I run the macro is must come as "was 1000" in comments. now I have changed value to 900. Next time I run the macro on same cell or cells it must show as "was900 was1000" now changed value to 800. so when I check cell comments I can see value actually dropped from 1000 to 900 and currently it is 800.
This comment was minimized by the moderator on the site
I need help to enter new row. However there are few condition . 1.> I need each row for Col A1(for ID# i.e. A1, A2..A25) as progressive addition when every time new row is entered. If , I'm entering new row after A20 then next row should have ID# as A21. It should always insert the row below last used row. 2.> Similarily, I need to add in progressive hyperlink cell value in the column "H1" onward. Is this possible, If yes, please advise.
This comment was minimized by the moderator on the site
I'm using Excel 2010 and facing same issue i.e. when char length is more than it skip to convert in comment. Please could you please advise as what change needs to be made in code to not limit the char length.
This comment was minimized by the moderator on the site
what is the string length limit for the conversion? It appears cells with Cell content longer than 255 are skipped. It would at least be better to get the first 255 characters converted
This comment was minimized by the moderator on the site
[quote]what is the string length limit for the conversion? It appears cells with Cell content longer than 255 are skipped. It would at least be better to get the first 255 characters convertedBy Darrel Stickler[/quote] Hello, please tell me the version information of your Excel. There is no such issue with Kutools for Excel 7.00. :) please contact me at jaychivo#extendoffice.com
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations