메인 컨텐츠로 가기

Excel에서 셀 색상을 다른 셀 색상과 동일하게 설정하는 방법은 무엇입니까?

셀 색상을 다른 색상과 일치시키려는 경우이 문서의 방법이 도움이 될 수 있습니다.

VBA 코드로 셀 색상을 다른 셀 색상과 동일하게 설정

VBA 코드로 셀 색상을 다른 셀 색상과 동일하게 설정

아래 VBA 방법을 사용하면 Excel에서 셀 색상을 다른 색상과 동일하게 설정할 수 있습니다. 다음과 같이하십시오.

1. 워크 시트에서 두 셀의 색상을 일치시켜야합니다. 시트 탭을 마우스 오른쪽 버튼으로 클릭 한 다음 코드보기 오른쪽 클릭 메뉴에서. 스크린 샷보기 :

2. 오프닝에서 응용 프로그램 용 Microsoft Visual Basic 창에서 VBA 코드를 복사하여 코드 창에 붙여 넣어야합니다.

VBA 코드 : 셀 색상을 다른 셀 색상과 동일하게 설정

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    Me.Range("C1").Interior.Color = Me.Range("A1").Interior.Color
End Sub

주의 사항: 코드에서 A1은 C1과 일치시킬 채우기 색상을 포함하는 셀입니다. 필요에 따라 변경하십시오.

그런 다음 C1 셀은 아래 스크린 샷과 같이 A1 셀과 동일한 색상으로 채워집니다.

이제부터 A1의 채우기 색상이 변경되면 C1이 자동으로 동일한 색상으로 일치됩니다.

관련 기사 :

최고의 사무 생산성 도구

🤖 Kutools AI 보좌관: 다음을 기반으로 데이터 분석을 혁신합니다. 지능형 실행   |  코드 생성  |  사용자 정의 수식 만들기  |  데이터 분석 및 차트 생성  |  Kutools 기능 호출...
인기 기능: 중복 항목 찾기, 강조 표시 또는 식별   |  빈 행 삭제   |  데이터 손실 없이 열이나 셀 결합   |   수식없이 반올림 ...
슈퍼 조회: 다중 기준 VLookup  |   다중 값 VLookup  |   여러 시트에 걸친 VLookup   |   퍼지 조회 ....
고급 드롭다운 목록: 드롭다운 목록을 빠르게 생성   |  종속 드롭다운 목록   |  다중 선택 드롭 다운 목록 ....
열 관리자: 특정 개수의 열 추가  |  열 이동  |  Toggle 숨겨진 열의 가시성 상태  |  범위 및 열 비교 ...
특색 지어진 특징: 그리드 포커스   |  디자인보기   |   큰 수식 바   |  통합 문서 및 시트 관리자   |  리소스 라이브러리 (자동 텍스트)   |  날짜 선택기   |  워크 시트 결합   |  셀 암호화/해독   |  목록으로 이메일 보내기   |  슈퍼 필터   |   특수 필터 (굵게/기울임꼴/취소선 필터링...) ...
상위 15개 도구 세트:  12 본문 도구 (텍스트 추가, 문자 제거,...)   |   50+ 거래차트 유형 (Gantt 차트,...)   |   40+ 실용 방식 (생일을 기준으로 나이 계산,...)   |   19 삽입 도구 (QR 코드 삽입, 경로에서 그림 삽입,...)   |   12 매출 상승 도구 (숫자를 단어로, 환율,...)   |   7 병합 및 분할 도구 (고급 결합 행, 셀 분할,...)   |   ... 그리고 더

Excel용 Kutools로 Excel 기술을 강화하고 이전과는 전혀 다른 효율성을 경험해 보세요. Excel용 Kutools는 생산성을 높이고 시간을 절약하기 위해 300개 이상의 고급 기능을 제공합니다.  가장 필요한 기능을 얻으려면 여기를 클릭하십시오...

상품 설명

Office Tab은 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게 만듭니다.

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, Publisher, Access, Visio 및 Project.
  • 새 창이 아닌 동일한 창의 새 탭에서 여러 문서를 열고 만듭니다.
  • 생산성을 50% 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
Comments (21)
No ratings yet. Be the first to rate!
Ali
Ali
This comment was minimized by the moderator on the site
не работает ваш код

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Me.Range("C1").Interior.Color = Me.Range("A1").Interior.Color
End Sub

после его добавления, при смене цвета в ячейке С1, он изменяется на тот цвет, который был
Reply
0
0
Nicki
Nicki
This comment was minimized by the moderator on the site
Hi, I am trying to change come cells to match another that have been conditionally formatted. Your code 
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Me.Range("C1").Interior.Color = Me.Range("A1").DisplayFormat.Interior.Color
End Sub
I adapted to
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Me.Range("A2:C2").Interior.Color = Me.Range("D2").DisplayFormat.Interior.Color
End Sub

This works fine for just one row.  How do I get this to work in all of the rows I need?  If I repeat the code with the next row
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Me.Range("A3:C3").Interior.Color = Me.Range("D3").DisplayFormat.Interior.Color
End Sub

Then I get a Compile error: Ambiguous name detected: Worksheet_SelectionChange
I tried having the code asPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Me.Range("A2:C10").Interior.Color = Me.Range("D2:D10").DisplayFormat.Interior.ColorEnd Sub

But all the rows just filled black rather than the colours required.  What coding do I need?
Reply
0
0
taitran07
taitran07
This comment was minimized by the moderator on the site
Hi -- I'm having a difficult time using your code. I'm trying to do exactly what you're saying. Make one cell be the same color as another cell (without any values necessary) on the same sheet. Is there something in that code that should be adjusted?
Reply
Report
0
0
Tech Support
Tech Support
This comment was minimized by the moderator on the site
I've attached a screen shot of the file Im working on - I don't seem to be able to upload a .xlsm file? In this file I have used the original VBA from this thread and can now match the conditionally formatted colour of cell A10 in D10. How can I get this to work on a range of cells? I would like to get the colour of the range of cells A10:A200 to transfer over to D10:D200. Can anyone help please? There is a drop down list in use in the A column but once we have placed an order we need to be able to over type the purchase order number. The items in the list are all set to conditionally format to a colour (eg ORDER OK turns cell green, CLIENT TBC turns cell yellow) but the colour goes blank once the PO has been put in.
Reply
0
0
Tech Support
Tech Support     Tech Support
This comment was minimized by the moderator on the site
image didn't upload - hopefully attached now....
Reply
0
0
Tech Support
Tech Support
This comment was minimized by the moderator on the site
Wow - this is great. I hope you can help me adapt your script to my needs. I need to make cells D10:D200 match the conditionally formatted colour of cells A10:A200 - can you help me to get this working please. The cells are all in the same worksheet.
Reply
0
0
Tony
Tony
This comment was minimized by the moderator on the site
As Chris I am interested in copying the background color from another worksheet?
Reply
0
0
Chris
Chris
This comment was minimized by the moderator on the site
I found your code to 'set cell color to equal to another cell color" and it works when I am using it on the same worksheet ( ex from cell A1 to cell A2). I am wondering if there is a way to have this same functionality from another worksheet (ex to copy cell color from sheet1!A1 to sheet2!A1? Any help you could offer would be appreciated!
Reply
0
0
Zack
Zack
This comment was minimized by the moderator on the site
This is a good start to what I am looking to do. But I am looking for something a bit more complicated

How could I adapt this to apply to multiple rows and a range. For instance I have a header column in Column B, I want cells from G to CS to match the colour of the header row but only is they have something in them ie the letter x. I know I can write an IF and THEN statement but how would I apply it to multiple Rows without writing a code for each row.
Reply
0
0
crystal
crystal     Zack
This comment was minimized by the moderator on the site
Hi Zack,
Sorry can't help you with that. Any question about Excel, please don’t hesitate to post in our forum: https://www.extendoffice.com/forum.html.
Reply
Report
0
0
yesser
yesser
This comment was minimized by the moderator on the site
hi , how to apply the same VBA but on a range of cells for example :

i want to have the same color of range (C8:X8) to be apply on the range (S16:AL16) one by one in the same order (S16 get the color of C16 , T16 get the color of D8 ....etc)
Reply
Report
0
0
crystal
crystal     yesser
This comment was minimized by the moderator on the site
Good day,

The below VBA code can help you solving the problem. Thanks for your comment.

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim xSRg, xDRg, xISRg, xIDRg As Range
Dim xFNum As Long
On Error Resume Next
Set xSRg = Range("C8:X8")
Set xDRg = Range("S16:AL16")
For xFNum = 1 To xSRg.count
Set xISRg = xSRg.Item(xFNum)
Set xIDRg = xDRg.Item(xFNum)
xIDRg.Interior.Color = xISRg.Interior.Color
Next xFNum
End Sub
Reply
Report
0
0
Shaun Symmonds
Shaun Symmonds     crystal
This comment was minimized by the moderator on the site
Hi

I am trying to do similar, but I have two spreadsheets (files). Spreadsheet 1 is the Master where the data is manually updated and file (spreadsheet 2) is equalling the data in the same cell as spreadsheet 1. When I open spreadsheet 2, I get a prompt to refresh with spreadsheet 1 no promlems, but if the colour of the cell is changed in spreadsheet 1 it does not update in spreadsheet 2, neither does 'strike-trough' of fonts..help please?
Reply
0
0
JJ
JJ
This comment was minimized by the moderator on the site
Hi, the cell being referenced for colour changes colour based on conditional formatting. The above doesn't seem to work with that and the destination cells are staying blank. How can this be corrected? Thanks
Reply
0
0
LP
LP     JJ
This comment was minimized by the moderator on the site
If you have Excel 2010 or later you can use the DisplayFormat function to return the color of a conditionally formatted cell. See below:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Me.Range("C1").Interior.Color = Me.Range("A1").DisplayFormat.Interior.Color
End Sub
Reply
0
0
The Carebear
The Carebear     LP
This comment was minimized by the moderator on the site
AMAZING... I should have read the comments sooner as I have been struggling for a while to figure this out.
Reply
0
0
Rafi
Rafi     LP
This comment was minimized by the moderator on the site
Hi,Would please write a code to apply conditional formatting from a colum of data to the next column?In colum A, I have a series of data from A1 to A1000 including conditional formatting which applies color in some of the cells. I need to apply those colors to the values in the next column B1 to B1000.
very much appreciated.
Reply
0
0
Rutger
Rutger     LP
This comment was minimized by the moderator on the site
Hi, would it be possible to extend this to a conditional formatting; not to match a color created by conditional format, but if a conditional format condition is matched, that the applied conditional format takes on the color of a specific cell. Trying to use this in a gantt chart, colouring the days between start and end date, but the conditional format that generates the gantt bars, should take the color of the cell that contains the Task (which I set manually)
Reply
Report
0
0
ISAM QASHASH
ISAM QASHASH     LP
This comment was minimized by the moderator on the site
can this be done on range of cells or just for a single cell?
Reply
0
0
Jose De Jesus
Jose De Jesus     LP
This comment was minimized by the moderator on the site
LP you are absolutely AMAZING!!!!!!i was trying for the longest time to get cells to match the conditional formatting background color! you are a lifesaver!!!
Reply
0
0
Marty
Marty     JJ
This comment was minimized by the moderator on the site
I have the same problem. Works on cells without conditional formatting but doesn't with those that do
Reply
0
0
There are no comments posted here yet
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations