메인 컨텐츠로 가기

Excel에서 여러 CSV 파일을 XLS (X) 파일로 일괄 변환하는 방법은 무엇입니까?

작가: 썬 최종 수정 날짜: 2020-05-14

CSV 파일을 XlS 또는 XLSX 파일로 변환하는 것은 다른 이름으로 저장 기능을 적용하여 매우 쉽습니다. 그러나 여러 CSV 파일을 폴더에서 XLS 또는 XLSX 파일로 변환하려면 하나씩 수동으로 저장하면 시간이 많이 걸립니다. 여기에서는 모든 CSV 파일을 폴더에서 XLS (x) 파일로 빠르게 일괄 변환하는 매크로 코드를 소개합니다.

매크로 코드를 사용하여 CSV 파일을 XlS (X) 파일로 일괄 변환


매크로 코드를 사용하여 CSV 파일을 XlS (X) 파일로 일괄 변환

여러 CSV 파일을 한 폴더에서 XLS (X) 파일로 변환하려면 다음 단계를 수행하십시오.

1. 새 통합 문서를 활성화하고 Alt + F11 여는 열쇠 응용 프로그램 용 Microsoft Visual Basic 창을 클릭 한 다음 끼워 넣다 > 모듈. 스크린 샷보기 :
문서 일괄 변환 cvs xls 1

주의 사항: 변환하려는 모든 CSV 파일이 닫혀 있는지 확인하십시오.

2. 그런 다음 매크로 코드 아래에 붙여 넣습니다. 모듈 스크립트를 누르고 F5 코드를 실행하는 키입니다.

VBA : CSV를 XLS로 변환

Sub CSVtoXLS()
'UpdatebyExtendoffice20170814
    Dim xFd As FileDialog
    Dim xSPath As String
    Dim xCSVFile As String
    Dim xWsheet As String
    Application.DisplayAlerts = False
    Application.StatusBar = True
    xWsheet = ActiveWorkbook.Name
    Set xFd = Application.FileDialog(msoFileDialogFolderPicker)
    xFd.Title = "Select a folder:"
    If xFd.Show = -1 Then
        xSPath = xFd.SelectedItems(1)
    Else
        Exit Sub
    End If
    If Right(xSPath, 1) <> "\" Then xSPath = xSPath + "\"
    xCSVFile = Dir(xSPath & "*.csv")
    Do While xCSVFile <> ""
        Application.StatusBar = "Converting: " & xCSVFile
        Workbooks.Open Filename:=xSPath & xCSVFile
        ActiveWorkbook.SaveAs Replace(xSPath & xCSVFile, ".csv", ".xls", vbTextCompare), xlNormal
        ActiveWorkbook.Close
        Windows(xWsheet).Activate
        xCSVFile = Dir
    Loop
    Application.StatusBar = False
    Application.DisplayAlerts = True
End Sub

3. 팝업 대화 상자에서 변환하려는 CSV 파일이 포함 된 지정된 폴더를 선택합니다. 스크린 샷보기 :
문서 일괄 변환 cvs xls 2

4. 클릭 OK, 선택한 폴더의 모든 CSV 파일이 XLS 파일로 변환되었습니다.
문서 일괄 변환 cvs xls 3

: CSV 파일을 XLSX 파일로 변환하려면 아래 VBA 코드를 사용합니다.

VBA : CSV 파일을 XLSX로 변환

Sub CSVtoXLS()
'UpdatebyExtendoffice20170814
    Dim xFd As FileDialog
    Dim xSPath As String
    Dim xCSVFile As String
    Dim xWsheet As String
    Application.DisplayAlerts = False
    Application.StatusBar = True
    xWsheet = ActiveWorkbook.Name
    Set xFd = Application.FileDialog(msoFileDialogFolderPicker)
    xFd.Title = "Select a folder:"
    If xFd.Show = -1 Then
        xSPath = xFd.SelectedItems(1)
    Else
        Exit Sub
    End If
    If Right(xSPath, 1) <> "\" Then xSPath = xSPath + "\"
    xCSVFile = Dir(xSPath & "*.csv")
    Do While xCSVFile <> ""
        Application.StatusBar = "Converting: " & xCSVFile
        Workbooks.Open Filename:=xSPath & xCSVFile
        ActiveWorkbook.SaveAs Replace(xSPath & xCSVFile, ".csv", ".xlsx", vbTextCompare), xlWorkbookDefault
        ActiveWorkbook.Close
        Windows(xWsheet).Activate
        xCSVFile = Dir
    Loop
    Application.StatusBar = False
    Application.DisplayAlerts = True
End Sub

시트 범위를 한 번에 별도의 XLS / Word / PDF 또는 기타 형식 파일로 빠르게 변환하거나 내 보냅니다.

일반적으로 Excel은 범위를 CSV 또는 Excel 파일로 빠르게 내보내거나 저장하는 옵션을 지원하지 않습니다. 데이터 범위를 Excel의 CSV 또는 통합 문서로 저장하려면 VBA 매크로를 사용하여이를 수행하거나 범위를 클립 보드에 복사하여 새 통합 문서에 붙여 넣은 다음 통합 문서를 CSV 또는 학습장. Excel 용 Kutools Excel을 범위를 파일로 내보내기 다음 작업을 빠르게 처리하려는 Excel 사용자를위한 유틸리티 :  30일 모든 기능을 갖춘 무료 평가판을 보려면 클릭하세요!
doc 셀 범위를 파일로 내보내기
 
Excel 용 Kutools : 300 개 이상의 편리한 Excel 추가 기능으로 30 일 동안 제한없이 무료로 사용해 볼 수 있습니다.

관련 기사 :

최고의 사무 생산성 도구

🤖 Kutools AI 보좌관: 다음을 기반으로 데이터 분석을 혁신합니다. 지능형 실행   |  코드 생성  |  사용자 정의 수식 만들기  |  데이터 분석 및 차트 생성  |  Kutools 기능 호출...
인기 기능: 중복 항목 찾기, 강조 표시 또는 식별   |  빈 행 삭제   |  데이터 손실 없이 열이나 셀 결합   |   수식없이 반올림 ...
슈퍼 조회: 다중 기준 VLookup    다중 값 VLookup  |   여러 시트에 걸친 VLookup   |   퍼지 조회 ....
고급 드롭다운 목록: 드롭다운 목록을 빠르게 생성   |  종속 드롭다운 목록   |  다중 선택 드롭 다운 목록 ....
열 관리자: 특정 개수의 열 추가  |  열 이동  |  Toggle 숨겨진 열의 가시성 상태  |  범위 및 열 비교 ...
특색 지어진 특징: 그리드 포커스   |  디자인보기   |   큰 수식 바    통합 문서 및 시트 관리자   |  리소스 라이브러리 (자동 텍스트)   |  날짜 선택기   |  워크 시트 결합   |  셀 암호화/해독    목록으로 이메일 보내기   |  슈퍼 필터   |   특수 필터 (굵게/기울임꼴/취소선 필터링...) ...
상위 15개 도구 세트12 본문 도구 (텍스트 추가, 문자 제거,...)   |   50+ 거래차트 유형 (Gantt 차트,...)   |   40+ 실용 방식 (생일을 기준으로 나이 계산,...)   |   19 삽입 도구 (QR 코드 삽입, 경로에서 그림 삽입,...)   |   12 매출 상승 도구 (숫자를 단어로, 환율,...)   |   7 병합 및 분할 도구 (고급 결합 행, 셀 분할,...)   |   ... 그리고 더

Excel용 Kutools로 Excel 기술을 강화하고 이전과는 전혀 다른 효율성을 경험해 보세요. Excel용 Kutools는 생산성을 높이고 시간을 절약하기 위해 300개 이상의 고급 기능을 제공합니다.  가장 필요한 기능을 얻으려면 여기를 클릭하십시오...

상품 설명


Office Tab은 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게 만듭니다.

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, Publisher, Access, Visio 및 Project.
  • 새 창이 아닌 동일한 창의 새 탭에서 여러 문서를 열고 만듭니다.
  • 생산성을 50% 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
Comments (41)
Rated 5 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
Realmente me funcionó, muchas gracias!
Rated 5 out of 5
This comment was minimized by the moderator on the site
Thanks for this macro code! It works and converts my csv's to xlsx and saves me time. The only problem I have is that the column name in cell A1 is gone.
I have to add this back to all the xlsx files because this is needed for further scripts I run on the xlsx files.
This comment was minimized by the moderator on the site
Hi, Cyril, I have test the code again, the column name in A1 is still saved in the xlsx files.
This comment was minimized by the moderator on the site
Not working. Copied same code.. Pop up comes to select csv but even though there are csv files in the folder, non appears in the browse list. any reason why?
This comment was minimized by the moderator on the site
Buenos dias compañeros

Adiciona a lo que hace el script, quisiera poder convertir inmediatamente el texto en columnas, por la opción que no es delimitado por ningún tipo de caracter, adicional los tamaños de las columnas son diferentes. Vale la pena aclarar que si tomo cada archivo por separado y le aplico la opción de texto en columnas, bajo esa opción los puedo convertir sin problemas, abriéndolos uno por uno, pero si grabo esa macro y le aplico la misma macro a todos, inclusive usando la opción de "USAR REFERENCIAS RELATIVAS", no hace el proceso bien, porque el graba las posiciones de la delimitación del archivo que uso de ejemplo, pero necesito que lo aplique nuevo a cada archivo, es decir, como si abriera cada archivo nuevo y le hiciera manualmente la opción de delimitación y no aplique los valores de ubicación de las columnas identificados en el archivo ejemplo.

Ya inserte esa opcion en este archivo, sin embargo pasa lo que indico en la lineas arriba, solo requiero saber como puedo hacer para aplicar la conversion a cada archivo, aplicando la delimitacion del campo como su fuera un archivo nuevo.


Workbooks.Open Filename:=xSPath & xCSVFile
ActiveWorkbook.SaveAs Replace(xSPath & xCSVFile, ".csv", ".xlsx", vbTextCompare), xlWorkbookDefault

ESTA PARTE ES LA QUE AGREGUE APLICANDO EL FORMATO DEL TEXTO A COLUMNAS

StartRow:=1, DataType:=xlFixedWidth, FieldInfo:=Array(Array(0, 1), Array(18 _
, 1), Array(38, 1)), TrailingMinusNumbers:=True
ActiveCell.Cells.Select
ActiveCell.Cells.EntireColumn.AutoFit
ActiveCell.Offset(1, 0).Range("A1").Select
ActiveWorkbook.Save

HASTA AQUI AGREGUE YO

ActiveWorkbook.Close
Windows(xWsheet).Activate
xCSVFile = Dir

Loop
Application.StatusBar = False
Application.DisplayAlerts = True
End Sub

No se si me hago explicar bien, pero es mi problema.
This comment was minimized by the moderator on the site
yes it's not work.
This comment was minimized by the moderator on the site
How would I incorporate code into the XLSX batch file routine to semicolon separate the data into separate columns? The code shared converts the file from a .csv to a .xlsx, but it doesn't separate the data into separate columns.
This comment was minimized by the moderator on the site
This is working for me, but the file extension is not changing. Any tips?
This comment was minimized by the moderator on the site
I had the same problem. If your source file has an extention in capital letters (.CSV) it doesnt work. Just replace .csv to .CSV in the code in line 22 and then it should work. Well, at least for me it did.
This comment was minimized by the moderator on the site
Same for me -- all files remain .csv.
This comment was minimized by the moderator on the site
All csv files you choose have been save as new excel files, the original files (csv) do not change, there are new excel files with same contents existing.
This comment was minimized by the moderator on the site
I get an error "Object variable or with block variable not set" for this line:
xFd.Title = "/Users/[my.name]/Documents/[myFolder]" >> this is the path of a particular folder on my computer where I'm doing the conversion (the folder has a bunch of csv files inside)

Am I doing something wrong here?
This comment was minimized by the moderator on the site
You have an error on line 22 of the csv to xlsx
With Error - ActiveWorkbook.SaveAs Replace(xSPath & xCSVFile, ".csv", ".xls", vbTextCompare), xlWorkbookDefault
Corrected - ActiveWorkbook.SaveAs Replace(xSPath & xCSVFile, ".csv", ".xslx", vbTextCompare), xlWorkbookDefault
This comment was minimized by the moderator on the site
Thanks for your reminder, I have updated it, thanks again.
This comment was minimized by the moderator on the site
great article. How can I, save all the converted files in a new location? Can you please update the code and send it to me. Like allowing the user to choose his destination folder.


Thanks
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations