메인 컨텐츠로 가기

vlookup 및 셀 주석과 일치하는 값을 반환하는 방법은 무엇입니까?

Vlookup 함수를 적용하여 일치하는 값을 반환 할 때 채우기 색상, 글꼴 또는 주석 등과 같은 서식없이 값만 추출합니다. 그러나 때로는 주석을 포함하여 일치하는 값을 vlookup하고 반환해야 할 수도 있습니다. 다음 스크린 샷 결과를 얻으려면. Excel에서이 작업을 어떻게 해결할 수 있습니까?

VBA 코드를 사용하여 Vlookup 및 셀 주석과 일치하는 값 반환

VBA 코드를 사용하여 Vlookup 및 셀 주석과 일치하는 값 반환

아래 VBA 코드는 vlookup 및 해당 주석과 일치하는 값을 반환하는 데 도움이 될 수 있습니다. 다음과 같이하십시오.

1. 누르고 ALT + F11 키를 눌러 응용 프로그램 용 Microsoft Visual Basic 창.

2. 딸깍 하는 소리 끼워 넣다 > 모듈을 클릭 한 후 다음 코드를 복사하여 모듈 창문.

VBA 코드 : Vlookup 및 셀 주석과 일치하는 값 반환 :

Function VlookupComment(LookVal As Variant, FTable As Range, FColumn As Long, FType As Long) As Variant
'Updateby Extendoffice
    Application.Volatile
    Dim xRet As Variant 'could be an error
    Dim xCell As Range
    xRet = Application.Match(LookVal, FTable.Columns(1), FType)
    If IsError(xRet) Then
        VlookupComment = "Not Found"
    Else
        Set xCell = FTable.Columns(FColumn).Cells(1)(xRet)
        VlookupComment = xCell.Value
        With Application.Caller
            If Not .Comment Is Nothing Then
                .Comment.Delete
            End If
            If Not xCell.Comment Is Nothing Then
                .AddComment xCell.Comment.Text
            End If
        End With
    End If
End Function

3. 그런 다음 코드를 저장하고 코드 창을 닫고 다음 수식을 입력합니다. = vlookupcomment (H2, A2 : C10,3, FALSE) 결과를 찾기 위해 빈 셀에 넣고 엔터 버튼 키, 일치하는 값과 주석이 한 번에 반환됩니다. 스크린 샷 참조 :

주의 사항: 위의 공식에서 H2 해당 값을 반환하려는 조회 값입니다. A2 : C10 사용하려는 데이터 테이블입니다. 3 반환하려는 일치 값이 포함 된 열 번호입니다.

최고의 사무 생산성 도구

🤖 Kutools AI 보좌관: 다음을 기반으로 데이터 분석을 혁신합니다. 지능형 실행   |  코드 생성  |  사용자 정의 수식 만들기  |  데이터 분석 및 차트 생성  |  Kutools 기능 호출...
인기 기능: 중복 항목 찾기, 강조 표시 또는 식별   |  빈 행 삭제   |  데이터 손실 없이 열이나 셀 결합   |   수식없이 반올림 ...
슈퍼 조회: 다중 기준 VLookup  |   다중 값 VLookup  |   여러 시트에 걸친 VLookup   |   퍼지 조회 ....
고급 드롭다운 목록: 드롭다운 목록을 빠르게 생성   |  종속 드롭다운 목록   |  다중 선택 드롭 다운 목록 ....
열 관리자: 특정 개수의 열 추가  |  열 이동  |  Toggle 숨겨진 열의 가시성 상태  |  범위 및 열 비교 ...
특색 지어진 특징: 그리드 포커스   |  디자인보기   |   큰 수식 바   |  통합 문서 및 시트 관리자   |  리소스 라이브러리 (자동 텍스트)   |  날짜 선택기   |  워크 시트 결합   |  셀 암호화/해독   |  목록으로 이메일 보내기   |  슈퍼 필터   |   특수 필터 (굵게/기울임꼴/취소선 필터링...) ...
상위 15개 도구 세트:  12 본문 도구 (텍스트 추가, 문자 제거,...)   |   50+ 거래차트 유형 (Gantt 차트,...)   |   40+ 실용 방식 (생일을 기준으로 나이 계산,...)   |   19 삽입 도구 (QR 코드 삽입, 경로에서 그림 삽입,...)   |   12 매출 상승 도구 (숫자를 단어로, 환율,...)   |   7 병합 및 분할 도구 (고급 결합 행, 셀 분할,...)   |   ... 그리고 더

Excel용 Kutools로 Excel 기술을 강화하고 이전과는 전혀 다른 효율성을 경험해 보세요. Excel용 Kutools는 생산성을 높이고 시간을 절약하기 위해 300개 이상의 고급 기능을 제공합니다.  가장 필요한 기능을 얻으려면 여기를 클릭하십시오...

상품 설명

Office Tab은 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게 만듭니다.

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, Publisher, Access, Visio 및 Project.
  • 새 창이 아닌 동일한 창의 새 탭에서 여러 문서를 열고 만듭니다.
  • 생산성을 50% 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
Comments (20)
No ratings yet. Be the first to rate!
fana
fana
This comment was minimized by the moderator on the site
txs a lot. highly appreciated!
Reply
0
0
Gekido
Gekido
This comment was minimized by the moderator on the site
Hello this is a very good function, but it works for Notes, not Comments (this is how it is translated in my native language at least). Is there some way to change it from Notes to Comments? Also, is there a way to keep the cell format? (color of the original cell, etc).
Reply
0
0
fana
fana     Gekido
This comment was minimized by the moderator on the site
i've had the same issue. i can only say that having tried via vba to copy comments and notes... only notes are being copied, not the comments (although the have the same meaning, but a different functionality)... Notes seem to be of a static nature, unlike comments where you can keep "posting" to adding new text...Probably that's the reason....
Reply
0
0
skyyang
skyyang     fana
This comment was minimized by the moderator on the site
Hi, fana,
To extract the matched records with the comment in Office 365, please apply the below code:
Function VlookupComment(LookVal As Variant, FTable As Range, FColumn As Long, FType As Long) As Variant
'Updateby Extendoffice
    Application.Volatile
    Dim xRet As Variant 'could be an error
    Dim xCell As Range
    xRet = Application.Match(LookVal, FTable.Columns(1), FType)
    If IsError(xRet) Then
        VlookupComment = "Not Found"
    Else
        Set xCell = FTable.Columns(FColumn).Cells(1)(xRet)
        VlookupComment = xCell.Value
        With Application.Caller
            If Not .CommentThreaded Is Nothing Then
                .ClearComments
            End If
            If Not xCell.CommentThreaded Is Nothing Then
                .AddCommentThreaded xCell.CommentThreaded.Text
            End If
        End With
    End If
End Function


After pasting the code, apply this formula: =vlookupcomment(H2,A2:C10,3,FALSE) as well.

Please try, hope it can help you!
Reply
Report
0
0
Sajjad
Sajjad
This comment was minimized by the moderator on the site
Not working for me. I get #NAME? error when i use this formula. Please help.
Reply
0
0
skyyang
skyyang     Sajjad
This comment was minimized by the moderator on the site
Hello, Sajjad,Did you put the VBA code of this article into your workbook? Please check it.Or which Excel version do you use?Thank you!
Reply
Report
0
0
Julie
Julie
This comment was minimized by the moderator on the site
This is a wonderful. But when using this code I find the file crashes a lot on Excel 365. when removing auto save I found it’s a little better. But with multiple users in the file, the file will crash all the time. Does this code use a lot of memory or is it a compatibility issue? Thoughts? Thanks
Reply
0
0
camille
camille
This comment was minimized by the moderator on the site
Hi! I'm so glad I found this, the thing is, this actually works on notes, and not comments. is there a way to have work on comments and not notes? in notes i cannot tag my coworkers and i cannot reply either. thanks a lot!
Reply
0
0
CYC
CYC
This comment was minimized by the moderator on the site
i can do that at the first time. but after i try to use changing formula of multiple cells. It doesn't work now. after even i type vlookupcomment, the cell becomes blank.
Reply
0
0
Meheimer
Meheimer
This comment was minimized by the moderator on the site
My comment is too large for the default box size. Is there any way to increase the comment box size or possibly decrease the font size?
Reply
0
0
Meheimer
Meheimer     Meheimer
This comment was minimized by the moderator on the site
If anyone else needs this.


Function VlookupComment(LookVal As Variant, FTable As Range, FColumn As Long, FType As Long) As Variant

'Updateby Extendoffice

Application.Volatile

Dim xRet As Variant 'could be an error

Dim xCell As Range

xRet = Application.Match(LookVal, FTable.Columns(1), FType)

If IsError(xRet) Then

VlookupComment = "-"

Else

Set xCell = FTable.Columns(FColumn).Cells(1)(xRet)

VlookupComment = xCell.Value

With Application.Caller

If Not .Comment Is Nothing Then

.Comment.Delete

End If

If Not xCell.Comment Is Nothing Then

.AddComment xCell.Comment.Text

.Comment.Shape.ScaleWidth 2, msoFalse, msoScaleFromTopLeft

.Comment.Shape.ScaleHeight 2.5, msoFalse, msoScaleFromTopLeft

End If

End With

End If

End Function
Reply
0
0
Biplab Das
Biplab Das     Meheimer
This comment was minimized by the moderator on the site
I want only Comment as Cell Value using Vlookup...
Reply
0
0
Shamim Taifur
Shamim Taifur
This comment was minimized by the moderator on the site
Thanks, It's helpful & I have something to askIt returns with cell comment but the Image (Inserted using fill effects ) does not show
Please , help me out of this Issue
Reply
0
0
skyyang
skyyang     Shamim Taifur
This comment was minimized by the moderator on the site
Shamim,
Sorry for that there is no direct code for solving your problem, if anyone has the solution, please comment here.
Reply
Report
0
0
Frank Man
Frank Man
This comment was minimized by the moderator on the site
Frank
Hello,

In case of spreadsheet protected, when I open my workbook the cell return the error #VALUE!

How we can solve this problem?
Reply
0
0
skyyang
skyyang     Frank Man
This comment was minimized by the moderator on the site
Hello, Frank,
After inserting the code, you should save your workbook as Excel Macro-Enabled Workbook format, so that the code will not lose.
Please try! Thank you!
Reply
Report
0
0
vtsrtwr@gmail.com
This comment was minimized by the moderator on the site
Can we use cell in column B (order column) as comment for cell in column C (name). exc, comment for Helen is 80.
thank you for your help.
Reply
Report
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations