메인 컨텐츠로 가기

한 번에 여러 워크 시트의 데이터를 정렬하는 방법은 무엇입니까?

Excel에서는 특정 열을 기반으로 한 워크 시트의 데이터를 빠르고 쉽게 정렬 할 수 있지만 여러 워크 시트에서 데이터를 정렬 해 본 적이 있습니까? 하나씩 정렬하려면 시간이 많이 걸리므로이 기사에서는 쉽게 해결할 수있는 방법을 소개합니다.

VBA 코드를 사용하여 한 번에 여러 워크 시트의 데이터 정렬


화살표 블루 오른쪽 거품 VBA 코드를 사용하여 한 번에 여러 워크 시트의 데이터 정렬

통합 문서의 모든 시트에서 한 열을 기준으로 데이터를 정렬하려면 다음 VBA 코드가 도움이 될 수 있습니다.

1. 누르고 ALT + F11 키를 눌러 응용 프로그램 용 Microsoft Visual Basic 창.

2. 딸깍 하는 소리 끼워 넣다 > 모듈을 클릭하고 다음 코드를 모듈 창문.

VBA 코드 : 한 번에 여러 워크 시트의 데이터 정렬 :

Sub SortAllSheets()
   'Updateby Extendoffice
   Dim WS      As Worksheet
   ActiveSheet.Range("a1:f1").Select
   Selection.Copy
   On Error Resume Next
   Application.ScreenUpdating = False
   For Each WS In Worksheets
      WS.Columns("A:F").Sort Key1:=WS.Columns("E"), Order1:=xlDescending
   Next WS
   ActiveSheet.Range("A1").PasteSpecial Paste:=xlPasteAll
   Application.ScreenUpdating = True
End Sub

3. 그런 다음 F5 이 코드를 실행하려면 동일한 형식의 모든 시트가 각 시트의 E 열을 기준으로 한 번에 내림차순으로 정렬되었습니다.

주의 사항: 위 코드에서 A : F 정렬하려는 데이터 범위입니다. E 정렬 기준이되는 열 문자입니다.

최고의 사무 생산성 도구

🤖 Kutools AI 보좌관: 다음을 기반으로 데이터 분석을 혁신합니다. 지능형 실행   |  코드 생성  |  사용자 정의 수식 만들기  |  데이터 분석 및 차트 생성  |  Kutools 기능 호출...
인기 기능: 중복 항목 찾기, 강조 표시 또는 식별   |  빈 행 삭제   |  데이터 손실 없이 열이나 셀 결합   |   수식없이 반올림 ...
슈퍼 조회: 다중 기준 VLookup    다중 값 VLookup  |   여러 시트에 걸친 VLookup   |   퍼지 조회 ....
고급 드롭다운 목록: 드롭다운 목록을 빠르게 생성   |  종속 드롭다운 목록   |  다중 선택 드롭 다운 목록 ....
열 관리자: 특정 개수의 열 추가  |  열 이동  |  Toggle 숨겨진 열의 가시성 상태  |  범위 및 열 비교 ...
특색 지어진 특징: 그리드 포커스   |  디자인보기   |   큰 수식 바    통합 문서 및 시트 관리자   |  리소스 라이브러리 (자동 텍스트)   |  날짜 선택기   |  워크 시트 결합   |  셀 암호화/해독    목록으로 이메일 보내기   |  슈퍼 필터   |   특수 필터 (굵게/기울임꼴/취소선 필터링...) ...
상위 15개 도구 세트12 본문 도구 (텍스트 추가, 문자 제거,...)   |   50+ 거래차트 유형 (Gantt 차트,...)   |   40+ 실용 방식 (생일을 기준으로 나이 계산,...)   |   19 삽입 도구 (QR 코드 삽입, 경로에서 그림 삽입,...)   |   12 매출 상승 도구 (숫자를 단어로, 환율,...)   |   7 병합 및 분할 도구 (고급 결합 행, 셀 분할,...)   |   ... 그리고 더

Excel용 Kutools로 Excel 기술을 강화하고 이전과는 전혀 다른 효율성을 경험해 보세요. Excel용 Kutools는 생산성을 높이고 시간을 절약하기 위해 300개 이상의 고급 기능을 제공합니다.  가장 필요한 기능을 얻으려면 여기를 클릭하십시오...

상품 설명


Office Tab은 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게 만듭니다.

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, Publisher, Access, Visio 및 Project.
  • 새 창이 아닌 동일한 창의 새 탭에서 여러 문서를 열고 만듭니다.
  • 생산성을 50% 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
Comments (11)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
This didn't seem to work for me. I have a workbook with 12 sheets ordered by months of the year each sheet containing corresponding data regarding companies products etc. My objective is to sort and filter the all the sheets in the workbook. I would like to have one sheet that would act as the parent sheet (e.g. first month of the year), which I would perform a filter or sort function on (e.g. A -> Z sort) and automatically have the other sheets follow the same sort or filter. For example, when using the sheet labeled "January" if for example I choose column "D" which includes the days in the month which I want in "ascending" order - when actualizing the A -> Z sort on the "January" sheet, I want this to effect the rest of all the sheets in the sequence (Feb-Dec) with all days of the month sorted A -> Z. Any change made on the "January" sheet as it relates to sorting and filtering, should effect the balance of the sheets in the workbook.
This comment was minimized by the moderator on the site
Can you run this without including all sheets? I.e. leave some sheets out of the macro?
This comment was minimized by the moderator on the site
i want to split the data in multiple work books and then add the value in one of the column..

i have prepared the code to split the data in workbooks.. but need help on adding the total in one of the column
This comment was minimized by the moderator on the site
works well but how can I avoid including the headings (ie row 1?)
This comment was minimized by the moderator on the site
Hello, Lucy,
To sort all sheets exclude the header row, please apply the below vba code:(Note: please change the cell references to your need)

Sub SortAllSheets()
'Updateby Extendoffice
Dim WS As Worksheet
Dim xIntR As Integer
ActiveSheet.Range("A1:F1").Select
On Error Resume Next
Application.ScreenUpdating = False
For Each WS In Worksheets
xIntR = Intersect(WS.UsedRange, WS.Range("A:F")).Rows.Count
WS.Range("A2:F" & xIntR).Sort Key1:=WS.Range("A2:A" & xIntR), Order1:=xlDescending
Next WS
Application.ScreenUpdating = True
End Sub

Please try, hope it can help you!
This comment was minimized by the moderator on the site
Hey this is great thank you so much for this! My only issue with this code is that it does not execute on my first sheet. It does execute on my remaining sheets. HOw would I get this to execute on all of the sheets? It's as if the code skips over the first sheet. Any help would be much appreciated :)
This comment was minimized by the moderator on the site
Very usefull code Thanks
This comment was minimized by the moderator on the site
In the hope that you see this...! This works wonderfully - but it includes cells with a formula but no data, creating gaps in the tabs and messing up the data on the rows. I need to keep those cells in my tabs as they look up names added to the 'master tab' I want it to only sort cells with an actual name - a quick fix???
This comment was minimized by the moderator on the site
worked like a charm for me...thank you!
This comment was minimized by the moderator on the site
Doesn't work...
This comment was minimized by the moderator on the site
How can I make this work for multiple columns. I am trying to sort some by the K column and some by the M column and I know the exact sheet numbers. My M column (when I use the above code) is only being sorted by the K, not by M, so therefore it is not working. 
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations