메인 컨텐츠로 가기

Excel에서 활성 통합 문서의 모든 워크 시트에서 필터를 지우는 방법은 무엇입니까?

Excel 통합 문서의 서로 다른 워크 시트에 여러 필터를 만들었고 이제 이러한 모든 필터를 한 번에 지우려고한다고 가정합니다. 일반적으로 워크 시트로 이동하여 필터를 확인한 다음 수동으로 지워야합니다. 활성 통합 문서의 모든 워크 시트에서 필터를 지우는 편리한 방법이 있습니까? 이 기사의 방법을 시도하십시오.

VBA 코드를 사용하여 활성 통합 문서의 모든 워크 시트에서 필터 지우기


VBA 코드를 사용하여 활성 통합 문서의 모든 워크 시트에서 필터 지우기

활성 통합 문서의 모든 워크 시트에서 필터를 지우려면 아래 VBA 스크립트를 실행하십시오.

1. 통합 문서에서 필터를 지우려면 다른 + F11 키를 눌러 응용 프로그램 용 Microsoft Visual Basic 창.

2. 에서 응용 프로그램 용 Microsoft Visual Basic 창을 클릭합니다 끼워 넣다 > 모듈. 그런 다음 아래 VBA 스크립트를 복사하여 모듈 창에 붙여 넣으십시오. 아래 스크린 샷 참조 :

VBA 코드 : 활성 통합 문서의 모든 워크 시트에서 필터 지우기

Sub Clear_fiter()()
'Updated by Extendoffice 20210625
    Dim xAF As AutoFilter
    Dim xFs As Filters
    Dim xLos As ListObjects
    Dim xLo As ListObject
    Dim xRg As Range
    Dim xWs As Worksheet
    Dim xIntC, xF1, xF2, xCount As Integer
    Application.ScreenUpdating = False
    On Error Resume Next
    For Each xWs In Application.Worksheets
        xWs.ShowAllData
        Set xLos = xWs.ListObjects
        xCount = xLos.Count
        For xF1 = 1 To xCount
         Set xLo = xLos.Item(xF1)
         Set xRg = xLo.Range
         xIntC = xRg.Columns.Count
         For xF2 = 1 To xIntC
            xLo.Range.AutoFilter Field:=xF2
         Next
        Next
    Next
    Application.ScreenUpdating = True

End Sub

3. 누르세요 F5 코드를 실행하는 키입니다. 그런 다음 현재 통합 문서의 모든 워크 시트에있는 모든 필터가 즉시 지워집니다.


관련 기사:

최고의 사무 생산성 도구

🤖 Kutools AI 보좌관: 다음을 기반으로 데이터 분석을 혁신합니다. 지능형 실행   |  코드 생성  |  사용자 정의 수식 만들기  |  데이터 분석 및 차트 생성  |  Kutools 기능 호출...
인기 기능: 중복 항목 찾기, 강조 표시 또는 식별   |  빈 행 삭제   |  데이터 손실 없이 열이나 셀 결합   |   수식없이 반올림 ...
슈퍼 조회: 다중 기준 VLookup    다중 값 VLookup  |   여러 시트에 걸친 VLookup   |   퍼지 조회 ....
고급 드롭다운 목록: 드롭다운 목록을 빠르게 생성   |  종속 드롭다운 목록   |  다중 선택 드롭 다운 목록 ....
열 관리자: 특정 개수의 열 추가  |  열 이동  |  Toggle 숨겨진 열의 가시성 상태  |  범위 및 열 비교 ...
특색 지어진 특징: 그리드 포커스   |  디자인보기   |   큰 수식 바    통합 문서 및 시트 관리자   |  리소스 라이브러리 (자동 텍스트)   |  날짜 선택기   |  워크 시트 결합   |  셀 암호화/해독    목록으로 이메일 보내기   |  슈퍼 필터   |   특수 필터 (굵게/기울임꼴/취소선 필터링...) ...
상위 15개 도구 세트12 본문 도구 (텍스트 추가, 문자 제거,...)   |   50+ 거래차트 유형 (Gantt 차트,...)   |   40+ 실용 방식 (생일을 기준으로 나이 계산,...)   |   19 삽입 도구 (QR 코드 삽입, 경로에서 그림 삽입,...)   |   12 매출 상승 도구 (숫자를 단어로, 환율,...)   |   7 병합 및 분할 도구 (고급 결합 행, 셀 분할,...)   |   ... 그리고 더

Excel용 Kutools로 Excel 기술을 강화하고 이전과는 전혀 다른 효율성을 경험해 보세요. Excel용 Kutools는 생산성을 높이고 시간을 절약하기 위해 300개 이상의 고급 기능을 제공합니다.  가장 필요한 기능을 얻으려면 여기를 클릭하십시오...

상품 설명


Office Tab은 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게 만듭니다.

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, Publisher, Access, Visio 및 Project.
  • 새 창이 아닌 동일한 창의 새 탭에서 여러 문서를 열고 만듭니다.
  • 생산성을 50% 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
Comments (11)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
@Lorif - delete For Each xWs In Application.Worksheets and one of the Nexts
This comment was minimized by the moderator on the site
Which line should I change to restrict the macro to ONLY the active sheet, rather than all of them?Much appreciated!
This comment was minimized by the moderator on the site
hi, everytime I open the file the macro runs and the filters are cleared, how to avoid that "auto run" of the macro?
This comment was minimized by the moderator on the site
Hi Juan Moreno,
I am sorry for my mistake.Replace the first line:
Sub Auto_Open()withSub Clear_filter()with solve the problem.
This comment was minimized by the moderator on the site
this removes all filters, I wanted something that would clear the filters not remove them.
This comment was minimized by the moderator on the site
Hi Saima,I got your point. The code has been updated in the post to only clear the filters instead of removing them. Please to have a try and sorry for the inconvenience.<div data-tag="code">Sub Auto_Open()
'Updated by Extendoffice 20201113
Dim xAF As AutoFilter
Dim xFs As Filters
Dim xLos As ListObjects
Dim xLo As ListObject
Dim xRg As Range
Dim xWs As Worksheet
Dim xIntC, xF1, xF2, xCount As Integer
Application.ScreenUpdating = False
On Error Resume Next
For Each xWs In Application.Worksheets
xWs.ShowAllData
Set xLos = xWs.ListObjects
xCount = xLos.Count
For xF1 = 1 To xCount
Set xLo = xLos.Item(xF1)
Set xRg = xLo.Range
xIntC = xRg.Columns.Count
For xF2 = 1 To xIntC
xLo.Range.AutoFilter Field:=xF2
Next
Next
Next
Application.ScreenUpdating = True

End Sub
This comment was minimized by the moderator on the site
Thanks this help me alot ;=)
This comment was minimized by the moderator on the site
You fucking scumbag this deleted all our filters! Our whole python script was destroyed as a result of it costing us hours! GO TO HELL YOU SCUMBAGS!!!!!!!!!!!!!!!!
This comment was minimized by the moderator on the site
You're getting free help and degrading others for your own stupid mistakes. People like you deserve a special place in hell
This comment was minimized by the moderator on the site
Why didn't you test it fully before working on your latest file and don't you have backup... work on your IT habits before using harsh language.
This comment was minimized by the moderator on the site
Hi,
Sorry for the mistake. The code has been updated in the post to only clear the filters instead of removing them. Please to have a try and sorry for the inconvenience.
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations