메인 컨텐츠로 가기

Excel에서 모든 빈 줄 또는 셀의 첫 번째 줄만 삭제하는 방법은 무엇입니까?

셀의 공백과 혼합 된 여러 줄이있는 통합 문서를받을 수 있습니다. 셀에서 이러한 빈 줄을 삭제하는 방법은 무엇입니까? 그리고 첫 번째 줄만 삭제하는 것은 어떻습니까? 이 기사는 단계별로 처리하는 데 도움이 될 것입니다.

VBA 코드로 셀의 모든 빈 줄 삭제
VBA 코드가있는 셀의 첫 번째 줄만 삭제


VBA 코드로 셀의 모든 빈 줄 삭제

아래 스크린샷과 같이 셀의 모든 빈 줄을 삭제하려면 다음 VBA 코드를 실행하여 완료할 수 있습니다.

1. 누르세요 다른 + F11 키보드의 키를 누르면 열립니다. 응용 프로그램 용 Microsoft Visual Basic 창.

2. 에서 응용 프로그램 용 Microsoft Visual Basic 창을 클릭합니다 끼워 넣다 > 모듈. 그런 다음 아래 VBA 코드를 복사하여 모듈 창.

VBA 코드 : 셀의 모든 빈 줄 삭제

Sub DoubleReturn()
Dim xRng As Range, xCell As Range
Dim I As Integer
On Error Resume Next
Set xRng = Application.InputBox("Please select range:", "Kutools for Excel", Selection.Address, , , , , 8)
If xRng Is Nothing Then Exit Sub
On Error Resume Next
For Each xCell In xRng
  For I = 1 To Len(xCell) - Len(WorksheetFunction.Substitute(xCell, Chr(10), ""))
   xCell = Replace(xCell, Chr(10) + Chr(10), Chr(10))
  Next
Next
End Sub

3. 누르세요 F5 코드를 실행하는 키입니다. 그런 다음 삭제할 빈 줄이 있는 셀을 선택하십시오. Excel 용 Kutools 대화 상자. 마지막으로 OK 버튼을 클릭합니다.

그러면 아래 스크린샷과 같이 지정된 셀에서 모든 빈 줄이 삭제되는 것을 볼 수 있습니다. 텍스트는 여전히 다른 줄에 있습니다.


VBA 코드가있는 셀의 첫 번째 줄만 삭제

아래 스크린샷과 같이 A2 및 A3 셀의 첫 번째 줄을 삭제하려면 다음 VBA 코드가 도움이 될 수 있습니다.

1. 누르세요 다른 + F11 키를 눌러 응용 프로그램 용 Microsoft Visual Basic 창.

2. 에서 응용 프로그램 용 Microsoft Visual Basic 창을 클릭합니다 끼워 넣다 > 모듈. 그런 다음 아래 VBA 코드를 복사하여 모듈 창.

VBA 코드 : 셀의 첫 번째 줄만 삭제

Option Explicit
Sub RemoveFirstLine(ByRef Target As Range)
    Dim xCell As Range
    For Each xCell In Target.Cells
        xCell.Value = Right(xCell.Value, Len(xCell.Value) - InStr(1, xCell.Value, vbLf))
    Next
End Sub

Sub StartRemove()
Dim xRng As Range
   On Error Resume Next
   Set xRng = Application.InputBox("Please select range:", "Kutools for Excel", Selection.Address, , , , , 8)
   If xRng Is Nothing Then Exit Sub
   On Error Resume Next
   RemoveFirstLine xRng
End Sub

3. 누르세요 F5 코드를 실행하는 키입니다. 팝업에서 Excel 용 Kutools 대화 상자에서 첫 번째 줄만 삭제해야 하는 셀을 선택한 다음 OK 버튼을 클릭합니다.

그러면 아래 스크린 샷과 같이 지정된 셀에서 모든 첫 번째 줄이 삭제되는 것을 볼 수 있습니다.


관련 기사:

최고의 사무 생산성 도구

🤖 Kutools AI 보좌관: 다음을 기반으로 데이터 분석을 혁신합니다. 지능형 실행   |  코드 생성  |  사용자 정의 수식 만들기  |  데이터 분석 및 차트 생성  |  Kutools 기능 호출...
인기 기능: 중복 항목 찾기, 강조 표시 또는 식별   |  빈 행 삭제   |  데이터 손실 없이 열이나 셀 결합   |   수식없이 반올림 ...
슈퍼 조회: 다중 기준 VLookup    다중 값 VLookup  |   여러 시트에 걸친 VLookup   |   퍼지 조회 ....
고급 드롭다운 목록: 드롭다운 목록을 빠르게 생성   |  종속 드롭다운 목록   |  다중 선택 드롭 다운 목록 ....
열 관리자: 특정 개수의 열 추가  |  열 이동  |  Toggle 숨겨진 열의 가시성 상태  |  범위 및 열 비교 ...
특색 지어진 특징: 그리드 포커스   |  디자인보기   |   큰 수식 바    통합 문서 및 시트 관리자   |  리소스 라이브러리 (자동 텍스트)   |  날짜 선택기   |  워크 시트 결합   |  셀 암호화/해독    목록으로 이메일 보내기   |  슈퍼 필터   |   특수 필터 (굵게/기울임꼴/취소선 필터링...) ...
상위 15개 도구 세트12 본문 도구 (텍스트 추가, 문자 제거,...)   |   50+ 거래차트 유형 (Gantt 차트,...)   |   40+ 실용 방식 (생일을 기준으로 나이 계산,...)   |   19 삽입 도구 (QR 코드 삽입, 경로에서 그림 삽입,...)   |   12 매출 상승 도구 (숫자를 단어로, 환율,...)   |   7 병합 및 분할 도구 (고급 결합 행, 셀 분할,...)   |   ... 그리고 더

Excel용 Kutools로 Excel 기술을 강화하고 이전과는 전혀 다른 효율성을 경험해 보세요. Excel용 Kutools는 생산성을 높이고 시간을 절약하기 위해 300개 이상의 고급 기능을 제공합니다.  가장 필요한 기능을 얻으려면 여기를 클릭하십시오...

상품 설명


Office Tab은 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게 만듭니다.

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, Publisher, Access, Visio 및 Project.
  • 새 창이 아닌 동일한 창의 새 탭에서 여러 문서를 열고 만듭니다.
  • 생산성을 50% 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
Comments (8)
Rated 5 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
This Works it removed my all lines but the only issue is it is taking so much time to run for a single cell and i have big data with me to do it and i think it is gonna take tooo much time for that
This comment was minimized by the moderator on the site
Hi Tanveer Khan,
The code runs at normal speed on my side. Can you tell me which Excel version are you using?
This comment was minimized by the moderator on the site
This is my first VBA, I have only got up to your first step and it has solved my problem, so far. I have printed your instructions for future reference. So far I am wrapt. Fabulous instruction too, thank you for your quality skills and detailing them.
Rated 5 out of 5
This comment was minimized by the moderator on the site
Jeg forstår desværre ikke et kvæk af ovenstående. Findes der ikke en nem og ligetil måde at fjerne tomme linier i Exell? Helst uden koder og andet mystisk!

Med venlig hilsen
Lene
This comment was minimized by the moderator on the site
Hello,
If you don't want to keep the original texts in different lines in cells, you can apply the following methods to get it done.
1. Use the Find & Replace feature:
Press the Ctrl + H keys. In the opening Find and Replace dialog box, click to activate the Find what box. Hold down the Alt key while typing 010 on the numeric keypad. Keep the Replace with box empty, click the Replace All button. But all the texts is concentrated on the same line.
2. Use the following formula in a helper column:
=SUBSTITUTE(A1, CONCATENATE(CHAR(13),CHAR(10),CHAR(13),CHAR(10)),CONCATENATE(CHAR(13),CHAR(10)))
where A1 is the cell you want to process.
This comment was minimized by the moderator on the site
Do you know how to adapt this to remove the last line instead of the first line, please? TIA
This comment was minimized by the moderator on the site
Hi,
this works awesome. How can I adjust the code to remove only the lines, not starting with numeric characters?

Thanks and best,
Jack
This comment was minimized by the moderator on the site
Hi Jack,
Sorry can't help you with that yet. Thank you for your comment.
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations