메인 컨텐츠로 가기

Excel에서 두 번 클릭하여 셀에 현재 날짜 / 시간을 자동으로 추가 / 입력하는 방법은 무엇입니까?

워크 시트에 현재 날짜 또는 날짜 시간을 자주 삽입해야하는 경우이 문서의 방법을 시도해 볼 수 있습니다. 이 기사는 더블 클릭만으로 지정된 범위 셀에 현재 날짜 또는 날짜를 자동으로 추가하거나 입력하는 데 도움이됩니다.

VBA 코드로 현재 날짜 또는 날짜 시간을 자동 추가 / 입력하려면 두 번 클릭하십시오.

VBA 코드로 현재 날짜 또는 날짜 시간을 자동 추가 / 입력하려면 두 번 클릭하십시오.

아래 VBA 코드를 실행하여 두 번 클릭하여 셀에 현재 날짜 또는 날짜 시간을 자동으로 추가 할 수 있습니다. 다음과 같이하십시오.

1. 지정된 셀에 현재 날짜를 삽입 할 시트 탭을 마우스 오른쪽 버튼으로 클릭 한 다음 코드보기 오른쪽 클릭 메뉴에서.

2. 에서 Microsoft Visual Basic for Applications 창에서 아래 VBA 코드를 복사하여 코드 창에 붙여 넣습니다.

VBA 코드 : 두 번 클릭하여 현재 날짜를 셀에 추가합니다.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
    If Not Intersect(Target, Range("A1:B10")) Is Nothing Then
        Cancel = True
        Target.Formula = Date
    End If
End Sub

노트:

1. 코드에서 A1 : B10은 현재 날짜를 추가 할 범위입니다.
2. 현재 날짜 시간을 셀에 추가해야하는 경우 날짜 과 지금() 코드에서. 필요에 따라 변경할 수 있습니다.

3. 프레스 다른 + Q 키를 동시에 닫아 응용 프로그램 용 Microsoft Visual Basic 창을 열고 워크 시트로 돌아갑니다.

이제부터는 지정된 범위 A1 : B10의 셀을 두 번 클릭 할 때. 현재 날짜 또는 날짜 시간이 자동으로 입력됩니다.

관련 기사:

최고의 사무 생산성 도구

🤖 Kutools AI 보좌관: 다음을 기반으로 데이터 분석을 혁신합니다. 지능형 실행   |  코드 생성  |  사용자 정의 수식 만들기  |  데이터 분석 및 차트 생성  |  Kutools 기능 호출...
인기 기능: 중복 항목 찾기, 강조 표시 또는 식별   |  빈 행 삭제   |  데이터 손실 없이 열이나 셀 결합   |   수식없이 반올림 ...
슈퍼 조회: 다중 기준 VLookup  |   다중 값 VLookup  |   여러 시트에 걸친 VLookup   |   퍼지 조회 ....
고급 드롭다운 목록: 드롭다운 목록을 빠르게 생성   |  종속 드롭다운 목록   |  다중 선택 드롭 다운 목록 ....
열 관리자: 특정 개수의 열 추가  |  열 이동  |  Toggle 숨겨진 열의 가시성 상태  |  범위 및 열 비교 ...
특색 지어진 특징: 그리드 포커스   |  디자인보기   |   큰 수식 바   |  통합 문서 및 시트 관리자   |  리소스 라이브러리 (자동 텍스트)   |  날짜 선택기   |  워크 시트 결합   |  셀 암호화/해독   |  목록으로 이메일 보내기   |  슈퍼 필터   |   특수 필터 (굵게/기울임꼴/취소선 필터링...) ...
상위 15개 도구 세트:  12 본문 도구 (텍스트 추가, 문자 제거,...)   |   50+ 거래차트 유형 (Gantt 차트,...)   |   40+ 실용 방식 (생일을 기준으로 나이 계산,...)   |   19 삽입 도구 (QR 코드 삽입, 경로에서 그림 삽입,...)   |   12 매출 상승 도구 (숫자를 단어로, 환율,...)   |   7 병합 및 분할 도구 (고급 결합 행, 셀 분할,...)   |   ... 그리고 더

Excel용 Kutools로 Excel 기술을 강화하고 이전과는 전혀 다른 효율성을 경험해 보세요. Excel용 Kutools는 생산성을 높이고 시간을 절약하기 위해 300개 이상의 고급 기능을 제공합니다.  가장 필요한 기능을 얻으려면 여기를 클릭하십시오...

상품 설명

Office Tab은 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게 만듭니다.

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, Publisher, Access, Visio 및 Project.
  • 새 창이 아닌 동일한 창의 새 탭에서 여러 문서를 열고 만듭니다.
  • 생산성을 50% 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
Comments (30)
No ratings yet. Be the first to rate!
Julio Andres Rodriguez Araya
Julio Andres Rodriguez Araya
This comment was minimized by the moderator on the site
Hello. How do I enter the code so I can insert the date in a cell and the time in the adjacent row?
Reply
0
0
Dan
Dan
This comment was minimized by the moderator on the site
Holy crap MS get with it! Google sheets can make this happen with a couple of clicks.
Reply
0
0
eder109
eder109
This comment was minimized by the moderator on the site
Hi all,

I try to use that macro to use the date stamp double clicking on column E and it's working but when I try to replicate the macro to do the same but for the current time on column F it is not working as you can see attached I have an error message stating : Ambiguous Name Detected.
When I try to change the Sub WorkSheet part for another name and double click in the cells nothing happens.

Could someone help me on that ?

My code :


Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Target, Range("E1:E10000")) Is Nothing Then
Cancel = True
Target.Formula = Date
End If
End Sub

Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Target, Range("F1:F10000")) Is Nothing Then
Cancel = True
Target.Formula = Now()
End If
End Sub
View Attachments (1 / 5)
Reply
Report
0
0
crystal
crystal     eder109
This comment was minimized by the moderator on the site
Hi Louis,
Replicate the macro will cause two same procedures with the same name in a single sheet code window. Excel doesn't allow two or more same names of functions in a module. Not even in Events. It leads to ambiguity.
If you want to do a different task on the same event, you need to modify the original code to meet your needs.
The following VBA code can do you a favor. Please give it a try.
Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
'Updated by Extendoffice 20221025
    If Not Intersect(Target, Range("E1:E10000")) Is Nothing Then
        Cancel = True
        Target.Formula = Date
    End If
    If Not Intersect(Target, Range("F1:F10000")) Is Nothing Then
        Cancel = True
        Target.Formula = Date
    End If
End Sub
Reply
Report
0
0
Bob
Bob
This comment was minimized by the moderator on the site
This function did not work. Double Clicking simply enters manual edit of cell.
Reply
0
0
crystal
crystal     Bob
This comment was minimized by the moderator on the site
Hi Bob,
The code works well in my case. I need to know more specific about your issue, such as your Excel version.
And the code only works on the cells you specified.
Reply
Report
0
0
Ahmad
Ahmad
This comment was minimized by the moderator on the site
Hello there, the code did a lot for me, How can I restrict the code to work only if field is blank. If a date is already there in the cell, double click should do nothing, regards
Reply
0
0
crystal
crystal     Ahmad
This comment was minimized by the moderator on the site
Hi Ahmad,
Sorry for the trouble. To only fill in the blank cells with dates with double-clicking, you can apply the following VBA code to get it done.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
'Updated by Extendoffice 20220609
    If Not Intersect(Target, Range("B1:C20")) Is Nothing Then
        If Target.Value = "" Then
            Cancel = True
            Target.Formula = Date
        End If
    End If
End Sub
Reply
Report
0
0
Joe
Joe
This comment was minimized by the moderator on the site
This was just what I was looking for - this save a ton of time and I appreciate the well written instructions. Thank you!
Reply
0
0
Lee Hoemann
Lee Hoemann
This comment was minimized by the moderator on the site
So I inserted code and it works great on several sheets in my workbook, however on some sheets it just suddenly stops working after a certain row even though I have the correct range entered. Any thoughts on why this might happen.
Reply
0
0
Heather
Heather
This comment was minimized by the moderator on the site
Does anyone know if there is a way to insert this code into Excel Online? I had used it with the desktop version and it worked great but now we have migrated everything to the online platform and my date and time stamps on double click have disappeared and I can't figure out how to view or edit the code. Thanks.
Reply
Report
0
0
Dylan
Dylan
This comment was minimized by the moderator on the site
Love the code and it works great. How can I make it so when I double click to execute the code its shows time in military time?
Reply
0
0
Heather
Heather     Dylan
This comment was minimized by the moderator on the site
I would think that if you just select the Military Time format for that cell from the Number -> Time format options that should do it. For example, you would select 13:30 instead of 1:30 PM, and then it should display in military time.
Reply
Report
0
0
Heather
Heather     Dylan
This comment was minimized by the moderator on the site
I think if you select the military time format for that cell from the Format -> Number -> Time options in your sheet that ought to work. For example, it gives the option of 1:30 PM or 13:30, so you would just select 13:30 and that should do it.
Reply
0
0
crystal
crystal     Dylan
This comment was minimized by the moderator on the site
Hi Dylan,
Sorry can't help you with that yet. Thank you for your comment.
Reply
Report
0
0
Max
Max
This comment was minimized by the moderator on the site
Hi there,

I copied and pasted the above code exactly as it is written into a blank workbook, however, it does not work for me. I looked at different sources on the web and most sites have a similar format as what is written above. I think perhaps there is something wrong with my VBA or some settings are not turned on. Any advice would be much appreciated. I am running Excel for Office 365 MSO (16.0.11001.20097) 32-bit on Windows 10.
Reply
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations