메인 컨텐츠로 가기

Excel에서 워크 시트 탭을 잠 그거나 고정하는 방법은 무엇입니까?

여러 워크 시트가 포함 된 통합 문서가 있다고 가정하면 통합 문서의 첫 번째 탭으로 Main-sheet라는 워크 시트가 있습니다. 이제이 시트 탭을 잠 그거나 고정하여 여러 워크 시트를 스크롤 할 때에도 항상 표시되도록하려고합니다. 실제로 탭을 고정하는 직접적인 방법은 없지만 해결 방법을 사용하여이 문제를 해결할 수 있습니다.

VBA 코드로 특정 워크 시트 탭 잠금 또는 고정


화살표 블루 오른쪽 거품 VBA 코드로 특정 워크 시트 탭 잠금 또는 고정

Excel에서 다음 VBA 코드를 적용하여 특정 워크 시트를 항상 현재 클릭 한 워크 시트 탭보다 먼저 만들 수 있으므로 다른 시트 탭을 스크롤 할 때 항상이 워크 시트를 볼 수 있습니다. 다음과 같이하십시오 :

1. 누르고 ALT + F11 키가 열립니다. Microsoft Visual Basic for Applications 창.

2. 그런 다음 이 워크북 왼쪽에서 프로젝트 탐색기 창을 두 번 클릭하여 모듈를 클릭 한 다음 다음 VBA 코드를 복사하여 빈 모듈에 붙여 넣습니다.

VBA 코드 : 특정 워크 시트 탭 고정 또는 잠금

Private Sub Workbook_SheetActivate(ByVal Sh As Object)
'Update by Extendoffice
Application.EnableEvents = False
Application.ScreenUpdating = False
If Application.ActiveSheet.Index <> Application.Sheets("Main-sheet").Index Then
    Application.Sheets("Main-sheet").Move Before:=Application.Sheets(Application.ActiveSheet.Index)
    Application.Sheets("Main-sheet").Activate
    Sh.Activate
End If
Application.ScreenUpdating = True
Application.EnableEvents = True
End Sub

문서-동결-시트-탭-1

3. 그런 다음이 코드를 저장하고 닫습니다. 이제 워크 시트 탭을 클릭하면이 특정 워크 시트가 항상 클릭 한 시트 탭의 맨 앞에 있습니다. 스크린 샷을 참조하십시오.

문서-동결-시트-탭-2
-1
문서-동결-시트-탭-3

주의 사항: 위 코드에서 Main-sheet는 고정하고자하는 시트 이름이며 필요에 따라 변경할 수 있습니다.


관련 기사 :

Excel 2010에서 창을 고정하는 방법은 무엇입니까?

한 번에 여러 워크 시트에 창 고정 / 고정 해제를 적용하는 방법은 무엇입니까?

최고의 사무 생산성 도구

🤖 Kutools AI 보좌관: 다음을 기반으로 데이터 분석을 혁신합니다. 지능형 실행   |  코드 생성  |  사용자 정의 수식 만들기  |  데이터 분석 및 차트 생성  |  Kutools 기능 호출...
인기 기능: 중복 항목 찾기, 강조 표시 또는 식별   |  빈 행 삭제   |  데이터 손실 없이 열이나 셀 결합   |   수식없이 반올림 ...
슈퍼 조회: 다중 기준 VLookup    다중 값 VLookup  |   여러 시트에 걸친 VLookup   |   퍼지 조회 ....
고급 드롭다운 목록: 드롭다운 목록을 빠르게 생성   |  종속 드롭다운 목록   |  다중 선택 드롭 다운 목록 ....
열 관리자: 특정 개수의 열 추가  |  열 이동  |  Toggle 숨겨진 열의 가시성 상태  |  범위 및 열 비교 ...
특색 지어진 특징: 그리드 포커스   |  디자인보기   |   큰 수식 바    통합 문서 및 시트 관리자   |  리소스 라이브러리 (자동 텍스트)   |  날짜 선택기   |  워크 시트 결합   |  셀 암호화/해독    목록으로 이메일 보내기   |  슈퍼 필터   |   특수 필터 (굵게/기울임꼴/취소선 필터링...) ...
상위 15개 도구 세트12 본문 도구 (텍스트 추가, 문자 제거,...)   |   50+ 거래차트 유형 (Gantt 차트,...)   |   40+ 실용 방식 (생일을 기준으로 나이 계산,...)   |   19 삽입 도구 (QR 코드 삽입, 경로에서 그림 삽입,...)   |   12 매출 상승 도구 (숫자를 단어로, 환율,...)   |   7 병합 및 분할 도구 (고급 결합 행, 셀 분할,...)   |   ... 그리고 더

Excel용 Kutools로 Excel 기술을 강화하고 이전과는 전혀 다른 효율성을 경험해 보세요. Excel용 Kutools는 생산성을 높이고 시간을 절약하기 위해 300개 이상의 고급 기능을 제공합니다.  가장 필요한 기능을 얻으려면 여기를 클릭하십시오...

상품 설명


Office Tab은 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게 만듭니다.

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, Publisher, Access, Visio 및 Project.
  • 새 창이 아닌 동일한 창의 새 탭에서 여러 문서를 열고 만듭니다.
  • 생산성을 50% 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
Comments (10)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
chăng đc gi cả
This comment was minimized by the moderator on the site
As Thuyen pointed out 2 years ago, you can't copy data between sheets while this code is active. Furthermore, the code is needlessly complicated. The sheet that you activate is passed to the procedure as the parameter "Sh". This makes the frequent calls to "ActiveSheet" unnecessary, and could cause problems for someone who's trying to modify the code but isn't very experienced.

Here's my versions that corrects those issues, and even shows how to add a 2nd "Main" sheet (similar to what Dzingai posted):
-----------------------------------------------------------------

'These 2 lines aren't necessary if you use the sheets' codenames, which I recommend.
Set shtMain1 = Worksheets("Main-Sheet-1")
Set shtMain2 = Worksheets("Main-Sheet-2")

If Application.CutCopyMode = False Then
If Sh.Index <> shtMain1.Index And Sh.Index <> shtMain2.Index Then
shtMain1.Move before:=Sh
shtMain2.Move before:=Sh
Sh.Activate
End If
End If
This comment was minimized by the moderator on the site
This code worked well. Only problem is...if we close the file & open it again it goes off.
This comment was minimized by the moderator on the site
[quote]This code worked well. Only problem is...if we close the file & open it again it goes off.By Sangs[/quote] Try saving document as Macro-Enabled Workbook. I think it should work well that way.
This comment was minimized by the moderator on the site
Is it possible to create one with multiple arguments? Like instead of just moving the one main sheet to the front of where you are working, is it possible to move three tabs in front of what you are working on?
This comment was minimized by the moderator on the site
Yes, it is possible, you just have to add more arguments to the if clause using the "AND" like this IF Application.ActiveSheet.Index Application.Sheets("Main-sheet").Index AND Application.ActiveSheet.Index Application.Sheets("Other-Main-sheet").Index and so on... Then Application.Sheets("Main-sheet").Move Before:=Application.Sheets(Application.Sheets("Other-Main-sheet").Index) Application.Sheets("Main-sheet").Activate Application.Sheets("Other-Main-sheet").Move Before:=Application.Sheets(Application.ActiveSheet.Index) Application.Sheets("Other-Main-sheet").Activate Sh.Activate This will place the Main-Sheet, then the Other-Main-Sheet in front of your active sheet.
This comment was minimized by the moderator on the site
is this vba my excel sheet not freezeplease give me solution
This comment was minimized by the moderator on the site
Could not get your code to work, but this one did :) Private Sub Workbook_SheetActivate(ByVal Sh As Object) Dim sc As Long ' count of sheets Dim NewPos As Long ' index of serlected sheet Application.EnableEvents = False Application.ScreenUpdating = False If ActiveSheet.Index 1 Then sc = Sheets.Count NewPos = ActiveSheet.Index For i = 2 To NewPos - 1 Sheets(2).Move After:=Sheets(sc) Next i Sheets(1).Activate Sheets(2).Activate End If Application.ScreenUpdating = True Application.EnableEvents = True End Sub
This comment was minimized by the moderator on the site
When I use VBA, I cannot copy data from Main-Sheet to another sheet Please help me fix this bug
This comment was minimized by the moderator on the site
hahaha. so true! did you find a fix for this?
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations