메인 컨텐츠로 가기

Excel에서 활성 셀 또는 선택을 강조 표시하는 방법은 무엇입니까?

워크 시트가 크면 활성 셀 또는 활성 선택을 한 눈에 찾기가 어려울 수 있습니다. 그러나 활성 셀 / 섹션이 뛰어난 색을 가지고 있다면 문제가되지 않을 것입니다. 이 기사에서는 Excel에서 활성 셀 또는 선택한 셀 범위를 자동으로 강조 표시하는 방법에 대해 설명합니다.

VBA 코드로 활성 셀 또는 선택 강조


화살표 블루 오른쪽 거품 VBA 코드로 활성 셀 또는 선택 강조

다음 VBA 코드는 활성 셀 또는 선택 항목을 동적으로 강조 표시하는 데 도움이 될 수 있습니다. 다음과 같이하십시오.

1. 누르고 ALT + F11 키를 눌러 Microsoft Visual Basic for Applications 창.

2. 그런 다음 이 워크북 왼쪽에서 프로젝트 탐색기, 두 번 클릭하여 모듈를 클릭 한 다음 다음 VBA 코드를 복사하여 빈 모듈에 붙여 넣습니다.

VBA 코드 : 활성 셀 또는 선택 강조

Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Excel.Range)
'Update 20140923
Static xLastRng As Range
On Error Resume Next
Target.Interior.ColorIndex = 6
xLastRng.Interior.ColorIndex = xlColorIndexNone
Set xLastRng = Target
End Sub

문서 강조 표시 활성 셀-1

3. 그런 다음이 코드를 저장하고 닫은 다음 워크 시트로 돌아갑니다. 이제 셀이나 선택 항목을 선택하면 선택한 셀이 강조 표시되고 선택한 셀이 변경되면 동적으로 이동합니다.

배송 시 요청 사항:

1. 찾을 수없는 경우 프로젝트 탐색기 창 창에서 관측 > 프로젝트 탐색기 FBI 증오 범죄 보고서 Microsoft Visual Basic for Applications 창 그것을여십시오.

2. 위의 코드에서 변경할 수 있습니다 .색상 인덱스 = 6 당신이 좋아하는 다른 색깔에 색깔.

3.이 VBA 코드는 통합 문서 내의 모든 워크 시트에 적용 할 수 있습니다.

4. 워크 시트에 색상이 지정된 셀이있는 경우 해당 셀을 클릭 한 다음 다른 셀로 이동하면 색상이 손실됩니다.


관련 기사 :

Excel에서 활성 셀의 행과 열을 자동 강조 표시하는 방법은 무엇입니까?

최고의 사무 생산성 도구

인기 기능: 중복 항목 찾기, 강조 표시 또는 식별   |  빈 행 삭제   |  데이터 손실 없이 열이나 셀 결합   |   수식없이 반올림 ...
슈퍼 조회: 다중 기준 VLookup    다중 값 VLookup  |   여러 시트에 걸친 VLookup   |   퍼지 조회 ....
고급 드롭다운 목록: 드롭다운 목록을 빠르게 생성   |  종속 드롭다운 목록   |  다중 선택 드롭 다운 목록 ....
열 관리자: 특정 개수의 열 추가  |  열 이동  |  Toggle 숨겨진 열의 가시성 상태  |  범위 및 열 비교 ...
특색 지어진 특징: 그리드 포커스   |  디자인보기   |   큰 수식 바    통합 문서 및 시트 관리자   |  리소스 라이브러리 (자동 텍스트)   |  날짜 선택기   |  워크 시트 결합   |  셀 암호화/해독    목록으로 이메일 보내기   |  슈퍼 필터   |   특수 필터 (굵게/기울임꼴/취소선 필터링...) ...
상위 15개 도구 세트12 본문 도구 (텍스트 추가, 문자 제거,...)   |   50+ 거래차트 유형 (Gantt 차트,...)   |   40+ 실용 방식 (생일을 기준으로 나이 계산,...)   |   19 삽입 도구 (QR 코드 삽입, 경로에서 그림 삽입,...)   |   12 매출 상승 도구 (숫자를 단어로, 환율,...)   |   7 병합 및 분할 도구 (고급 결합 행, 셀 분할,...)   |   ... 그리고 더

Excel용 Kutools로 Excel 기술을 강화하고 이전과는 전혀 다른 효율성을 경험해 보세요. Excel용 Kutools는 생산성을 높이고 시간을 절약하기 위해 300개 이상의 고급 기능을 제공합니다.  가장 필요한 기능을 얻으려면 여기를 클릭하십시오...

kte 탭 201905


Office Tab은 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게 만듭니다.

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, Publisher, Access, Visio 및 Project.
  • 새 창이 아닌 동일한 창의 새 탭에서 여러 문서를 열고 만듭니다.
  • 생산성을 50% 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
Comments (16)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
I had the same problem, read the whole page and comments. While thinking to apply it or not, I was just randomly clicking on number and letters to select the whole column and rows. Then suddenly highlight of selected cell feature came back :)
This comment was minimized by the moderator on the site
Hello, if someone can help me... I pick up this code in internet (apologies to the owner). It does almost what i need but this code select the entirerow. What i need is a change that alow to select just the first two cells of the row of the activecells. When i click in the cell, i need that the cell of the column "$I16" and "$J16" (16 is the first line of my table) of that row became interior color (=9359529). The code is this: 
Dim lTarget As Range

Private Sub Worksheet_SelectionChange(ByVal Target As Range)

If Target.Row >= 16 Then

If Not lTarget Is Nothing Then

lTarget.EntireRow.Interior.ColorIndex = 0
End If

Target.EntireRow.Interior.Color = 9359529

Set lTarget = Target
End If
End Sub

Can you help me? I had try to change this code but the only thing i can as the select the interior color of the cell target and not the column "$I" and "$J" in that specific row.Thank you for your help.
Luis Lopes
This comment was minimized by the moderator on the site
I know that you proposed a solution but the solution comes with another problem as you described below: "The only problem with having this code active is that you can no longer change the active cell color as it changes back to what it was before you clicked it. I suggest that if you need to change the highlight colors on the sheet, do so with macros disabled or change the sub name for a second so it doesn't trigger when you are clicking on cells". This is not an acceptable alternative for me. I need to be able to change the colors in the cells when the macro is active. Do you have a solution for this this problem. If you come up with a solution for this problem please republish your corrected macro the new macro in full (rather than proposing patches to your original macro because I am technically challenged as far as macro are concerned).
This comment was minimized by the moderator on the site
I tried your macro by copying and pasting it into my Excel file. I did change one thing in the macro though. I changed the color index from 6 to 24 (to a color different than the colors I am currently using in my macro). It worked very nicely and I liked it a lot but then started causing a problem for me. I have a lot of cells filled with with colors in my Excel. The macro started removing the color fill from every cell touched. I don't know how to stop the macro's this odd behavior. I did not have any choice but to remove the macro from my file. I still like to use this macro if someone can help me to fix it.
This comment was minimized by the moderator on the site
That was super helpful, thank you.
This comment was minimized by the moderator on the site
Anyway you can do the left adjacent cell to highlight instead of active cell? Or a range of cells around the activecell?
This comment was minimized by the moderator on the site
Thank you, but use this with caution. It has the undesirable counter effect of not letting undo. Is there any solution for that?
This comment was minimized by the moderator on the site
But i am unable to do undo option and lose the previously assigned cell color also.
Please provide solution
This comment was minimized by the moderator on the site
Perfect solution as I always tend to loose the track of the highlighted cell during "Find and Select" operation. Thanks a lot.
This comment was minimized by the moderator on the site
Great!! But what if I don't want to lose the previously assigned cell color? That would be greater to know.
This comment was minimized by the moderator on the site
Use a conditional format on the cells you want to protect.
This comment was minimized by the moderator on the site
Instead of "ColorIndex" which has a limited set of 255 values (meaning any custom colors are lost), use "Color" instead. You'll need to store the old value in a new static long variable and also generate the highlight color you want with the RGB function. The only problem with having this code active is that you can no longer change the active cell color as it changes back to what it was before you clicked it. I suggest that if you need to change the highlight colors on the sheet, do so with macros disabled or change the sub name for a second so it doesn't trigger when you are clicking on cells, then just rename it back to normal to "re-activate" it. Here is my code:

Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Excel.Range)

Static xLastRng As Range
Static xLastRngColor As Long

On Error Resume Next

xLastRng.Interior.Color = xLastRngColor
xLastRngColor = Target.Interior.Color
Target.Interior.Color = RGB(255, 255, 0) 'compose whatever highlight color you want with RGB values, I am using yellow here
Set xLastRng = Target

End Sub
This comment was minimized by the moderator on the site
work.... great...
This comment was minimized by the moderator on the site
Yes, I would like to know this as well. How would you keep the previously selected cells highlight for tracking purposes?
This comment was minimized by the moderator on the site
See my comment above.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations