메인 컨텐츠로 가기

Excel에서 차트 / 그림 / 단추 이동을 방지하는 방법은 무엇입니까?

Excel에서는 워크 시트를보다 생생하고 명확하게 만들기 위해 차트, 그림 또는 단추와 같은 일부 개체를 항상 삽입합니다. 그러나 이러한 개체 아래로 셀을 끌면 부동 개체가 셀과 함께 자동으로 이동하거나 크기가 조정됩니다. Excel에서 이러한 개체의 크기가 조정되거나 이동되지 않도록하려면 어떻게해야합니까?

Excel 2007/2010에서 차트 / 그림 / 단추 이동 방지

Excel 2013에서 차트 / 그림 / 단추 이동 방지


화살표 블루 오른쪽 거품 Excel 2007/2010에서 차트 / 그림 / 단추 이동 방지

Excel 2010/2007이있는 경우 다음 단계를 통해이 작업을 해결할 수 있습니다.

1. 크기 조정 또는 이동을 방지하려는 특정 개체를 선택하고 형성 리본에서 doc-stop-차트-moving2 버튼의 크기 그룹, 스크린 샷 참조 :

doc-stop-차트-moving1

2. 튀어 나온 대화 상자에서 :

(1.) Excel 2010에서 등록 왼쪽 창에서 옵션을 선택한 다음 셀을 이동하거나 크기를 조정하지 마십시오., 스크린 샷 참조 :

doc-stop-차트-moving1

(2.) Excel 2007에서 등록 탭을 선택 셀을 이동하거나 크기를 조정하지 마십시오. 옵션을 선택합니다.

doc-stop-차트-moving1

3. 그런 다음 닫기 버튼을 클릭하고 다음에 셀을 드래그하면 개체가 더 이상 이동하거나 크기가 조정되지 않습니다.


화살표 블루 오른쪽 거품Excel 2013에서 차트 / 그림 / 단추 이동 방지

Excel 2013/2007에서 Excel 2010의 속성을 설정하는 데 약간의 차이가 있습니다. 다음과 같이하십시오.

1. 크기 조정 또는 이동을 방지하려는 특정 개체를 선택하고 형성 리본에서 doc-stop-차트-moving2 버튼의 크기 그룹, 스크린 샷 참조 :

doc-stop-차트-moving1

2. 튀어 나온 창에서 크기 및 속성 아이콘 및 확인 셀을 이동하거나 크기를 조정하지 마십시오. 아래의 옵션 속성 섹션, 스크린 샷 참조 :

doc-stop-차트-moving1

3. 설정을 변경 한 후 창을 닫습니다.

최고의 사무 생산성 도구

🤖 Kutools AI 보좌관: 다음을 기반으로 데이터 분석을 혁신합니다. 지능형 실행   |  코드 생성  |  사용자 정의 수식 만들기  |  데이터 분석 및 차트 생성  |  Kutools 기능 호출...
인기 기능: 중복 항목 찾기, 강조 표시 또는 식별   |  빈 행 삭제   |  데이터 손실 없이 열이나 셀 결합   |   수식없이 반올림 ...
슈퍼 조회: 다중 기준 VLookup    다중 값 VLookup  |   여러 시트에 걸친 VLookup   |   퍼지 조회 ....
고급 드롭다운 목록: 드롭다운 목록을 빠르게 생성   |  종속 드롭다운 목록   |  다중 선택 드롭 다운 목록 ....
열 관리자: 특정 개수의 열 추가  |  열 이동  |  Toggle 숨겨진 열의 가시성 상태  |  범위 및 열 비교 ...
특색 지어진 특징: 그리드 포커스   |  디자인보기   |   큰 수식 바    통합 문서 및 시트 관리자   |  리소스 라이브러리 (자동 텍스트)   |  날짜 선택기   |  워크 시트 결합   |  셀 암호화/해독    목록으로 이메일 보내기   |  슈퍼 필터   |   특수 필터 (굵게/기울임꼴/취소선 필터링...) ...
상위 15개 도구 세트12 본문 도구 (텍스트 추가, 문자 제거,...)   |   50+ 거래차트 유형 (Gantt 차트,...)   |   40+ 실용 방식 (생일을 기준으로 나이 계산,...)   |   19 삽입 도구 (QR 코드 삽입, 경로에서 그림 삽입,...)   |   12 매출 상승 도구 (숫자를 단어로, 환율,...)   |   7 병합 및 분할 도구 (고급 결합 행, 셀 분할,...)   |   ... 그리고 더

Excel용 Kutools로 Excel 기술을 강화하고 이전과는 전혀 다른 효율성을 경험해 보세요. Excel용 Kutools는 생산성을 높이고 시간을 절약하기 위해 300개 이상의 고급 기능을 제공합니다.  가장 필요한 기능을 얻으려면 여기를 클릭하십시오...

상품 설명


Office Tab은 Office에 탭 인터페이스를 제공하여 작업을 훨씬 쉽게 만듭니다.

  • Word, Excel, PowerPoint에서 탭 편집 및 읽기 사용, Publisher, Access, Visio 및 Project.
  • 새 창이 아닌 동일한 창의 새 탭에서 여러 문서를 열고 만듭니다.
  • 생산성을 50% 높이고 매일 수백 번의 마우스 클릭을 줄입니다!
Comments (13)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
How to prevent the object from getting dragged, while still allowing to activate?
This comment was minimized by the moderator on the site
"Don't move or size with cells" DOESN'T prevent user from dragging the object around. It only prevents the object from moving if rows or columns are resized, or if cells are moved around. The only way to prevent the object from getting dragged is to lock it, and then protect the worksheet (but then you can't activate the object).
This comment was minimized by the moderator on the site
Done and Thanks...
This comment was minimized by the moderator on the site
if you are using office 365, make sure you save it as the new excel format. .xslx

i was using an existing form from the company which was saved using format 97-2003 .xls

once i save into the new format it stop resizing my pictures. hope this helps.
This comment was minimized by the moderator on the site
you're a genius! thanks!!
This comment was minimized by the moderator on the site
The "solution" does not work.
This comment was minimized by the moderator on the site
Any way to do this with a Pivot table?
This comment was minimized by the moderator on the site
This worked in Office 2010, but I am now using Office 365. Excel is totally disregarding the "Don't move or resize ..." selection. When a spreadsheet is opened, graphics are stretching to what appears to be random aspect ratios no matter that "Don't move or resize ..." AND "Lock aspect ratio" are BOTH checked. I am using the latest version of Windows 10 and the latest version of Office 365 as of August 2016. This bug is killing me. I am going to be forced back to Office 2007.
This comment was minimized by the moderator on the site
Has this been solved? Am trying to move graphics as I sort the data. graphics are well within the cell size. move and don't resize checked.
This comment was minimized by the moderator on the site
Yes. This is exactly an issue only in Office 365. The only work around that i have noticed is to copy the entire printable content page by page into Word file and from that i have printed as PDF and it worked but really tedious if we have to work with multiple pages. Microsoft should fix this bug at the earliest.
Thanks Sada Sivam Manickavasagam
This comment was minimized by the moderator on the site
I use Office 365 and my excel has the same problem. Hope someone can fix this bug sooner.
This comment was minimized by the moderator on the site
I am having this same issue, and it's a real pain, as I need a tree map for a daily report and don't want to constantly readjust each day before publishing.
This comment was minimized by the moderator on the site
Regardless of the settings, once you use print preview, the objects constantly move and resize on the worksheet in Excel 2010.
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations